THE EXLAMATION MARK AT THE TOP OF THE PRINTER IS FLASHING AND THERE IS A LINE GOING AROUND THE SCREEN ON THE DISPLAY PANEL, THE PRINTER WILL NOT RESPOND TO ANYTHING, THANKS
there is a flag switch located to the left hand side of the top cover that causes this issue
if you look at the left hand lip of the top cover, you should note that it does not meet flush with the top of the control panel, there is a cutout for the lever for the flag switch that appears to not move as smoothly as designed, my guess is a mismounted switched or a misaligned axle for the switch
you can actually access the switch lever itself when the top cover is open, just reach in and wiggle it until it depresses properly, you may have to do this (or at least check it) every time you open the top cover
170 views
Usually answered in minutes!
THE EXLAMATION MARK AT THE TOP OF THE PRINTER IS FLASHING AND THERE IS A LINE GOING AROUND THE SCREEN ON THE DISPLAY PANEL, THE PRINTER WILL NOT RESPOND TO ANYTHING, THANKS
I just replaced the ink packs, closed the cover, and the red problem light is flashing. When a print job is initiated, job will go to print quey but will not transfer to printer. ???? - help !!
Exclamation mark flashing.
Picture of stacked paper on printer screen, and below that 2 teardrops.
there is paper in the printer and there is no jammed paper. Have switched off and back on, same problem. the basic guide is no help.
×