At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
B0605 message. Follow HP's directions at http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01687323&lang=en&cc=us&conte...
and put the printer in BootCode mode then ran the firmware updater.
The directions indicated that the printer would restart on it's own, but if does not, so let the printer sit for about a minute after the Firmware Updater says it was done, then power down the printer and pull out it's power cord. Let it sit for about 15 seconds, then plug it back in and start it up. When the printer starts up, the printer's display may go through a bunch of messages (Erasing...) for a few seconds. When it finishes with all of the messages, you should be able to print to the printer again.
I hope this helps. Regards, Mike
The printer's firmware (controlling software) has mulfunctioned.
A common error message on the HP LaserJet P2055dn series is the B0605 Firmware Error. If you are handy with a computer, the first step is to follow HP's trouble-shooting steps and re-flash the firmware in BootCode mode, then reboot the printer. Re-flashing the firmware doesn't always help, but it's a good first step. See HP's trouble-shooting document here: Error
B0601, B0602, B0603, B0604, or B0605 displayed during printer initialization
Check this link: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01687323&lang=en&cc=us&contentType=SupportFAQ&prodSeriesId=3662052&prodTypeId=18972&printver=true
If this process does NOT fix your B0605 firmware error, you will probably need to replace the formatter assembly, which is the main logic board in the printer.
I have an HP LaserJet P2055dn and I am getting a 10.000 supply memory error. I've checked HP's website and I am not finding anything related to this problem for my printer. What do I need to do?
×