Need To Install pioneer ts-g950m speaker in my car

Yes but you may have to do a little cutting.

remove old speakers... then replace with new ones...

depending on the vehicle make and model... this is easy to do.

Hi,
I guess the below link will be useful to you
http://www.pioneer.eu/uk/brochures/index.html

Thanks

go to crutchfield.com call them and get wire harnesses for them they carry all of them and have directions for install.

big red
all you need is about 1 and 1/2 foot deep for relly good bass even better if it is vented

i would recommend 12awg speaker wire

Hello mike_mccuske,

The OEM speakers will still work OK with your new Pioneer. Just don't turn it up too loud. Of course you'll get improved sound if you replace the speakers. Your Pioneer's RMS power is 14 watts, and the peak (maximum) power is 50 watts. The door speakers in a 2000 Honda Civic are 6.5" and you can get a set of Pioneer speakers, the TS-G1642R's, from Crutchfield for less than $50. Their RMS power range is 2-30 watts and they can handle a peak power of up to 180 watts.

Hope this helps.

http://www.crutchfield.com/S-CG43snm28MD/App/Product/Category/GroupMenu.aspx?g=750&tp=457
check here i think yo will find something.I know mounts kits for speakers do exist.Rating please

the brown wire is the LR+,yellowLR-. The drk blue is the RR+,lt blue is the RR-.If this dose not work test speakers.IF speakers work make sure you have a good output from stereo with the old speakers.Are you using the factory deck?

I'm assuming that you have left the original wiring intact? If this is the case then it's a pretty simple thing to do. There should only be 2 cables one for each speaker & each cable will have a positive & negative polarity. Once you have securely fixed the speakers into place (usually screwing into place through the mounting holes provided) you just need to attach the wires to the speakers. If your car has manufacturers plugs on & don't match the speaker ones (quite often the case now) simply cut them off & replace with spade connectors of the right type/size. The most important thing is to get the polarity the same way round for both speakers!If you get them reversed you will NOT get any bass. Also remember with any new speakers they need time to run in & sound their best....so take it easy with the volume control for the first 20hrs or so of play if you want them to sound great & last longer!