Need set up code for old JVC TV

0007 0018 0075 0103. Try these codes. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" view. It will make surf easier.
http://electrohelponline.blogspot.com/
Try this link too.
http://electro-medical.blogspot.com/

Hello
The code for JVC with Direct TV Universal remote is:
10053

Programming DIRECTV Remote

[1] Locate the DIRECTV Receiver's brand and model number

(on the back or bottom panel) and write it in the
spaces below.
[2] Enter the 5-digit code for your DIRECTV Receiver
[3] Power on the DIRECTV Receiver
[4] Move the slide switch to DIRECTV icon

[5] Press and hold in the MUTE and SELECT keys until the

green light under the DIRECTV icon flashes twice and
then release both keys.

[6] Using the number keys enter the 5-digit code. If performed

correctly the green light under the DIRECTV icon
will flash twice.

[7] Aim the remote at your DIRECTV Receiver and press

that the power key once. The DIRECTV Receiver should

turn off. If it does not turn off, repeat steps 3 and 4, trying

each code for your brand until you find the correct
code.
OK.

Not sure if you're asking for universal remote codes for a panasonic tv, or a direct tv set-top-box, but here are both:

Panasonic codes:

0051, 0055, 0250

Your Direct TV reciever can be made by any number of companies. You may also have a combo reciever/DVR or other combo device. Whatever you have, you should be able to find the code you need here:

http://2getdtv.com/directv/directv_receiver_codes.html

I'm ignoring it. Watching another TV.

"This TV utilizes new remote control signal codes and may not be compatible with your existing universal remote (e.g. satellite box remotes, cable box remotes, generic universal remotes, etc.). Over time, newer universal remote controls that become available should pick up the new TV codes."

I picked up a universal jumbo remote and for codes on the back the name brand is not there, so I was wondering if you had a 3 diggit code for curtis brand

All the codes for this remote can be found here http://product-support-omnitechnology.com/PDFDocs/709053-instr_Page2.pdf.

can not get my rc64 direct tv remote to turn off my lc195 em92 tv

if the Directv remote has the ability to operate other units you will need to input a code for the Vizio into the Directv remote

The code for a Magnavox Converter *Analog to Digital* to a Philips Universal Remote is 0759