How do I use the Anglecare Deluxe Movement sensor moniter without the movement sensor? I would like to be able to hear the audio even if the baby is not sleeping on the pad but is in the room. Thanks.
Re: How do I use the Anglecare Deluxe Movement sensor...
Mine has a switch on the back of the base unit with three options. one of which being sound only. another being sound and movement, and the third being tic off.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Without inspecting this item it is impossible to diagnose the problem. If the product is under 12 months old please return it to your retailer with proof of purchase.
If the product is under 12 months old please return to your retailer with proof of purchase for them to assist under the terms and conditions of the warranty. Without being able to inspect the product it is impossible to diagnose the problem.
There are two components to your monitor - the sound sensor and the movement sensor.
The movement sensor is a pad that is placed underneath the crib mattress on a solid surface - if you just have springs supporting the mattress, you may need to buy a piece of plywood to place underneath the mattress. The pad is connected by a cable to the movement sensor port on the sound monitor. The other connection on the sound monitor is the power. So, position the sensor pad under the crib mattress, then plug it into the sound monitor and connect the listening unit to a power source.
You have two listening units. Just plug them in and set them to the same channel (A or B) as your sound monitor. You'll hear what's going on in the nursery, and if the movement sensor doesn't sense movement for 30 seconds, it'll chirp. If it still doesn't sense movement for another 10 seconds, an alarm will sound.
Press the UP arrow, two or three times until the combination of functions you want are showing (in this case, sound and movement, but no tick). Press SELECT. Job done.
I have 3 AC adapters of 110v which I bought on ebay but didn't realize that here is 240v, they are brand new. I have then bought two other adapters of same voltage/amps and do not need them. let me hv ur shipping add, could check the shipping rate.
×