Runs but no water comes in - Whirlpool 24 in. DU920PW Built-In Dishwasher

Maybe bad pump. Remove wand and wand hose, run machine with water in. High pressure water coming out of wand/hose connection, bad wand or hose. No high pressure water, bad pump, replace.

Run vinegar through it

There could be over 50 things that will not let that machine make ice so help me out. when in freeze mode is compressor running, is condenser fan running, is water pump running, check condenser coil to make sure it's not full of dirt if so blow it out, cut machine off if water sump tray is full of water and you can still here water coming in at all check water flote to much water coming in all the time will not let water freeze. Fell evaporator plate while running if warm to touch could be hot gas valve letting hot gas in to plate in freeze cycle. you need to call a service company

Hi,
There are many reasons for a dehumidifier to not work or collect water.
Here is a tip that I wrote to help people to figure out what is going wrong with their dehumidifier.

Dehumidifier is running but no water is in bucket
http://www.fixya.com/support/r4662409-dehumidifier_running_but_no_water_in

heatman101

I would assume the water pump blade,on the inside,has come off,the car should be running hot also,if not,run a water hose threw the heater hoses to clear it out.

Check connection under sink to ensure sediment is not blocking inflow. You will need unplug, shut off water valve, then disconnect hose from water source and check for blockage due to buildup of minerals/hard water. Make certain first that flexible dishwasher intake hose is not kinked..

you have a hole in one of your hoses.

its filled up the bottom of the box and its just enough to blow out when running

the rinnai comes on when water starts flowing through the unit.

Please share the make and model of your filter.