Proxim ap 2000 11b/g cardbus driver free? - Proxim ORiNOCO AP-2000 11b/g Kit 802.11g/b (8800-FC) Wireless Adapter

Hi, I am Steve, lets get you some help
the IP address you need is 169.254.128.132

The default password is should be "public" if it was factory defaulted.

See the AP700 Hardware Overview below.... while the router is on.. press and hold the reset button (hole) for about 10 sec, using a paperclip.. the simplest way to restore your default setting..

The software you need is available free at Proxim, the legal copyright holder of the software. You will need to make a free account to download the software. Here is the download link: http://support.proxim.com/cgi-bin/proxim.cfg/php/enduser/std_adp.php?p_faqid=1225

AVerMedia E502 CardBus TV tuner card driver v3.3.22.4.zip 3.3.22.4 specifications

type the following url in the address bar of your browser and download the drivers.

http://download.cnet.com/AVerMedia-E502-CardBus-TV-tuner-card-driver-v3-3-22-4-zip/3010-2110_4-416508.html

Find your drivers on this page:
http://www.wireless-driver.com/wifi/corega.htm

Copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

you can get the driver from Dlink's website for free, here is the link for your driver http://support.dlink.com/products/view.asp?productid=DWL%2D650%2B

Simple solution, firstly do not press the reset button to long as it will erase all software, or you will have to do this the hard way. google the software called ScanTool run that from either ethernet or wireless, this tool shows you the AP-700's ip, mac, and name (some techs run these AP's coadjacent so it shows the name as well). You can change the ip of the AP-700 from here most of the time with the proper pass, then you should be able to connect to it regardless. if this dont help ... Proxim/Support/AP700 you will find more of an in depth approach of these things there.

Hi,

you need an access point or wireless router. Over here in the UK 802.11a you require a licence for class a devices. However all of the proxim decvices I have used in the past have been A/B/G compliant so you if your particular card is A/B/G compliant then you should be able to get a B/G class access point or router.

Hope this helps, please let me know if you need further assistance.

Regards

Nick

Device setting themselves on their own to default?  Sometimes power surges, thunderstorms causes all of these. Reconfigure devices and try to buy surge protector.