At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I would recommend a $20 jewelry cleaner from a tool shop. it comes in handy for many things. it will help get the debris out of the small check valves in the carburetor. That is the issue with a machine stalling out or not running above idle when you have fixed air leaks like the fuel line.
You can get parts and supplies at stores like www.arcolawn.com
If it's a Zama 2-stroke carb...the reference settings for the high and low speed needle jets are... turn them all the way in till they are snug and them bring them back out about 1 1/2 turns. (one and a half ) That is a good starting point for their carbs and should get it to start so fine tuning can be done.
Your SX-135 string trimmer was built by Homeliteand has a model number of UT-20601. That said, your trimmer's primer bulb part number depends on teh type of carburetor it has. If your trimmer has a Walbro carburetor, the primer bulb part no. is 01201. If it has a Zama carburetor (the most likely one) the primer bulb part no. is A01195A.
One fuel line (the on with the filter in the end of it) comes out of the fuel tank and goes to the bottom fitting on the carburator. The other hose comes out of the tank and goes to the bottom fitting on the primer bulb. A third section of fuel line goes from the top fitting on the primer bulb to the top fitting on the carburator. Hope this helped and best wishes.
The longest of the two lines is the one that pulls the fuel from the tank. It should also have a fuel filter attached to the end of it which lays at the bottom of the tank. The other line goes form the primer bulb on the carb. to just inside the tank ( about 1/2 in to 1 inch).
×