I have used the printer for about 6 months now with no problems. However lately whenever the paper feeder starts to feed in a sheet of paper, the paper skews in one direction and thus jams. It acts as though the roller is pulling on only one side.
I appreciate any help you can offer.
Ralph Locher
Issue: Paper feeds skewed
Solution: Clean The Paper Feed Rollers Using The Operation Panel - MP600
Clean The Paper Feed Rollers Using The Unit's Operation Panel
If the paper feed roller is dirty, paper is not fed properly because the paper feed roller slips. Cleaning the paper feed roller could resolve the paper feeding problem. Please follow the instructions below to clean the Paper Feed Rollers directly from the unit.
Caution: Since the cleaning process wears down the paper feed roller, perform this procedure only when necessary.
Paper Source
Note: If paper is not fed properly, repeat steps 4 through 10 above up to three times.
Press the <Feed Switch> button to switch to toggle between the Automatic Sheet Feed (ASF) or Cassette. The light will come on when the &lCanon PIXMA MP600 printer - paper feed - mp500_asf_led.gif is set for that paper source.
ASF
The above illustration shows a PIXMA MP500
Note: When printing from the computer, if paper does not feed from the source you have selected on the operation panel, check Paper Source setting in the printer driver. If the option is not set to 'Paper Feed Switch', paper will feed from the source selected in the driver.
Click here to return to step 2
7,228 views
Usually answered in minutes!
I too am having the same problem with the same printer.
×