How to set a radio inside the key phone under Panasonic KX-T7730 Advanced Hybrid System

Try using the programming software if you have them. Otherwise, there is a procedure on the manual if you have them. I use to download the manuals on the Panasonic webpage.

it may be the battery for its memory be dead...if this is true the phone installer can straighten it out for you

you have to do that in the pabx setting where by you set all out going calls to be calling direct but all incoming calls to be calling to the switchboard first so change the call restriction feature

http://www.wedophones.com/Manuals/Panasonic/KX-T%2077xx%20Manuals/KX-T%207720%20User%20Guide%201921wa.pdf

this manual covers the phone itself but you should look for the manual for your phone SYSTEM (box on the wall that runs all yours phones)

I need on to, for Panasonic KX-T7730 Advanced Hybrid System.

In programming you can set up Forced account codes for Local, Toll, or All calls. The extension is flagged in program 605 or 2.1 of the system and the codes are put in 310 or 1.5. It's one of 2 ways you can do it, you can also change Class of Service on each phone to deny them access to certain numbers.

Keep in mind that this is programming for a TA-824 release 3.0. We know loop start CO lines and no ISDN or BRI. Your system may be different.

Carl

my telephone is lock forget pasword

Hi it is available fvrom panasonic at this link

http://www2.panasonic.com/consumer-electronics/support/Phones-Fax/Business-Home-Systems/System-Phones/Advanced-Hybrid-Phones/model.KX-T7730B

hope it helps

jim

how do i change my voice message on my answering machine??

to store a speed dial on the kx-t7730 with the Advanced Hybrid System KX-TA624 you press the following keys

<pick up the receiver>
2
*
<the number you want to have as speed dial>
<the number you want to dial>
<press the square shaped key next to 0 and 9>
<wait for dial tone to return>
<hang up>

To call using the now saved speed dial, press the square shaped key and then the number you have saved to speed dial

For example

<pick up receiver> 2*1555555555<square key> <wait for dial tone> <hang up>

This will mean that when you press the square key and 1, it will dial 555555555