Purchased. the KONAKI DIGITAL TOUCH PERSONAL MEDIA PLAYER cdt-4 and it arrived today several questions: 1-how do you turn off the item so it does not continue to play 2-According to the manual there is supposed to be an installer on the CD but the files on the CD do not match the description in the manual. [Not sure if I really NEED the software - this is just an observation.] 3-there is a slot on the bottom of the unit poorly covered by an ill-fitting rubber strip which leaves the slot somewhat open. What is that slot for? 4-Is there a warranty? and for how long and instructions on where to send item to. thank you

SOURCE: A SanDisk Sansa m240 MP3 Player problem regarding the install cd!

First remove the Sansa from computer if you have attached it. 1. Open your Sansa mp3 player menu (with menu button next to volume control) 2. Choose settings 3. Choose USB 4. Change setting under USB from 'Auto Detect' to 'MSC' 5. Exit menu with menu button Plug your Sansa into computer with USB cable. You can now see the mp3 player as external drive, and you can drag mp3 files into it. Put your files into Sansa's Audible folder.

SOURCE: lost INSTALLATION CD for SAMSUNG DIGITAL AUDIO PLAYER YH-820MW

hello navnkg

you can get the driver form here Samsung YH-820 Driver - Software Driver Download™

or
SAMSUNG's Digital World - Support


riz.

SOURCE: MP3 player software installation problem (Sonic Stage)

lost installation cd

SOURCE: Installing Memory

put the new ram in slots 2 and 4.

Slots 1 & 2 are channel 1 slots 3 & 4 are channel 2, you need matching sets in each channel to run dual channel mode.

Harris

• 102 Answers
• Posted on Jan 31, 2009

SOURCE: Dimm Slots Not Numbered ?

The two closest to the cpu are DIMMs 1 and 2, The next pair are DIMMs 3 and 4 it is best to install in pairs, using slots 1 and 2 first.

Detailed info about this board including setup and comparisons to other boards can be found HERE