Does Konica Minolta bizhub c250 All-in-One Laser printer have default password to go in Administrator mode?

which one admin or service mode

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

To enter in service mode press the following key in that order:
Utility-Metercount-Check details_Stop-0-0-Stop-0-1 and select what you want.

yes u can overwirte the password go to service mode once there press zero then C cancel button.. need help message me

The Administrator setting will be available by entering the administrator password (8 dig-
its) The administrator password is initially set to "12345678."

There is no procedure to restore the admin password. It is possible to reset and enter a new password, and for that you will need a technician to make the adjustments on SERVICE MODE (stop,0,C).

still having trouble..if default password didnt work for you then try reseting it to default password by:
1) Utility/Counter
2) Details
3) press STOP zero zero + STOP zero one
and now your in Tech Mode
4) same page press STOP + Zero + C
5) modify admin password and retype and then exit
6) do not DO NOT touch any other options unless you know what your doing..you can lock the machine and would be able to work..rate if this helped you out

Change your dns and smtp in the copier. Go to your browser and type the IP of your copier in the address bar. You'll find these settings in the Network section, the administrator password is '12345678'or '00000000'

Reset your Toners and Imaging units for Minolta Bizhub and CF series.
http://www.chipreset.eu

Go to web browser and type the copier ip address click administrator the login password is 12345678. this the best way to access the network setting.

Try 12345678.  That worked for me for my Bizhub C250.

Konica Bizhub c350 default password is 12345678 give that a try