Can i connect a stereo receiver to my 62 inch projection tv

This condition sounds normal, often you need to turn off the speakers in the TV, via menu options on the TV.

No,try website like Remotes.com to buy the tv original remote.

I have a Panasonic 62 inch projection tv there is a bright green patch at the top left corner, need help to fix this

Make sure you turn the tv audio outputs on, use the menu on the tv to do this. Make sure you connect the audio out of the tv to the audio in on the stereo system.

Sounds like one of the light sources has failed or half of the projection source has failed(first is more likely)

If your TV is still on warranty you may want to call them to come pick it up. I doubt you'd want to move this yourself since it weighs over 100lbs

Is the tv and receiver in the same cabinet...or an area where the heat from one can affect the other. If so...you may have overheating. Also, be sure that airflow around the TV is good and that any air paths are open (enclosed cabinets can be bad news)

You can connect via a coax cable from the sat. box to VHF input of your TV and tune on ch 3 or 4 or connect via a RGB cable to component input of your TV or a regular Audio/Video composite cable will connect sat. receiver to your TV use yellow color for video and red&white for stereo Audio then choos the connected input on the menue and watch sat.

my screen is green what seems to be the problem

Monlink is the Connection I used with my Directv. All you need to use is the HDMI cords. Are you trying to also connect to stereo system or something other than a straight HDMI connection from Directv Box to WD-62525

A frosted sheet of plexiglas works well. I put a plexiglass screen on my own 62 inch projection TV. It must be frosted to received the image being projected.