Question about Black & Decker MX55 PowerPro Hand Mixer

4 Answers

Replacement beaters I need replacement beaters for Black & Decker Stand Mixer Model SM100. Nylon pads on beaters have worn off, which keeps bowl from rotating. Thanks!

Posted by on

  • abliss Oct 14, 2008

    I too need new beaters. Anyone have any luck?

  • Anonymous Mar 15, 2014

    Can I replace rice bowl in a black & decker HS80 in my HS800



4 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had an SM100 which did not work when I got it out to make cookies recently. So, I have both bowls available (large and small), beaters, dough hooks, whisks and the use and care book too! I sure will miss that mixer. Contact me at

Posted on Dec 06, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

SnowBelly...have you found new bowls? I am willing to buy your beaters from you if you want or if not, you can buy my bowls? Contact me at Put something in the subject line pertinent to it though because I delete a ton of spam every day. Thanks!

Posted on Oct 14, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have an SM100 too, and I just smashed the glass bowls for it a few days ago. I am going to try to get replacement bowls online but they haven't made this mixer in years so I doubt I will be able to find them. If I can't find new bowls, I can send you my beaters, they are still in good shape...or maybe you would be willing to part with your bowls and get a new mixer, instead?

Posted on Sep 24, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,691 Answers

Below is the link to where you can have parts for Black & Decker products. Some Black & Decker retailers can order parts, but they will charge you more.

Jerry G.

Posted on May 29, 2008

1 Suggested Answer

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Do you sell the gears that turn beaters on black and decker sm100 mixer

fixya doesn't sell anything
contact the manufacturer service agent to check for availability of parts or simply junk it and get a better machine

Sep 29, 2016 | Food Mixers

2 Answers

Need beaters for a black and decker SM100 mixer

I searched for replacement beaters for Blacker & Decker SM-100 type 1 (SM100) electric stand mixer for years. I found the Sunbeam Mixmaster Mixer Replacement Beaters for stand mixers, item 4955, at a large Ace hardware store. They were priced over $16.00, so you may consider buying a new stand mixer. The beaters are the correct length, snap in and grip correctly even though the ends are curved like a half ball rather than flat as the originals. The beaters turns well but I haven't tested them with the bowl because I need to find the turn table that I have in storage. The beater set was design ed to replace parts for Sunbeam stand models 2355-1, 2356-1 and 2360-2.

Jan 18, 2012 | Black & Decker Food Mixers

1 Answer

I need to replace the beaters on a Black and Decker Mixer MX77 220W 120V. What part number do I need

Available replacement parts for the Black and Decker Mixer MX77, including beaters, can be found here:

You are able to order on-line; Part No 177177-00.

Mar 21, 2011 | Black & Decker Food Mixers

2 Answers

Pin comes out/mixer attachements grind on bowl.

See what stops it going forward. If it's a rubber pad you can replace or repair it. As far as the pin is concerned. Is the hole worn out or the pin? Measure the pin size and see what diameter it is If you can send me a picture co7196@yahoo .com and we'll come up with a satisfactory resolve. Ned

Sep 21, 2009 | KitchenAid KSM150PS Artisan Series Stand...

1 Answer

Have a sunbeam heritage stand mixer model 2346-000.

Make sure the bowl is off to the side. I wouldn't get rid of a mixer just because the bowl doest't, if it's a good powerful mixer. There aren't many replacement parts available except directly from sunbeam. You need to get a replacement motor for the bowl turntable.

Jan 08, 2009 | Sunbeam Heritage 2346 Stand Mixer

1 Answer

Black & Decker SM100 bowls

My Black and Decker Multi-Mix bowls have both cracked through the base so I had to thorw them out as they are unsafe to use. Where can I purchase replacemetns or what else can I use? I live in hobart, tas.

Dec 08, 2008 | Food Mixers

2 Answers

How many Watts on the B & D M205S

200 Watts! I have owned the M205S for 15 years! YUP! and used it to death! Doesn't owe me a penny! But I am so upset, because although the 200 Watt motor is still running great, one of the beaters just broke off. I didn't know if replacement beaters are still available for such an old model?

Dec 31, 2007 | Black & Decker 200 Watts MX85...

5 Answers

Replacement beaters for hand mixer

Hi, replacement beaters can be found easily on amazon, click here and take a look: Amazon com hand mixer beaters. Wish you best of luck.

Jul 14, 2007 | Black & Decker MX55 PowerPro Hand Mixer

Not finding what you are looking for?
Black & Decker MX55 PowerPro Hand Mixer Logo

677 people viewed this question

Ask a Question

Usually answered in minutes!

Top Black & Decker Food Mixers Experts

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Karl Kittsteiner

Level 2 Expert

216 Answers

K Prevost

Level 1 Expert

9 Answers

Are you a Black & Decker Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides