Re: My samsung dmr77lhs LE light keeps flashing how do i...
I have the same problem with my dmr77. My coffee pot ran over and evidently ran down behind the Samsung dishwasher. It thinks that it is leaking. How do you reset it?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
ower Source: Check the power source to ensure that the machine is properly connected to a power outlet and that the outlet is functioning.
Software Issues: Check the machine's software to see if there are any updates available and install them if necessary.
Resetting the Machine: Try resetting the machine by unplugging it from the power source, waiting a few minutes, and then plugging it back in.
Electrical Components: Check the electrical components of the machine, including the power cord, to ensure that there are no loose connections or other issues.
Display Screen: The issue could be with the display screen. Contact a Butterick service center or a qualified technician for repair.
If none of these solutions resolve the issue, it is recommended that you seek assistance from a qualified Butterick technician
Hi
An LE error code on the washer's display indicates that the motor is locked, possibly due to a heavy wash load. ... But if the error code displays on every washing cycle, the unit will require a repair service. How to reset the washing machine: Press POWER to turn the washer off.
I hope this helps Nick
Hello, W/D here. The LE code indicates that the dishwasher thinks that there is a leak, and the leak detector shut the machine down and displayed the LE code. If you in fact have a leak, it should be repaired either as warranty work or by a reputable repairperson. The LE code can be reset by turning off the circuit breaker controlling the power to the dishwasher for several minutes, then resetting it. If you have a stainless dishwasher, it is guaranteed for life (usually) against leakage. Samsung will require a service call by their tech, and if the unit is unrepairable, will depreciate the unit before offering a refund. Not great. The good news is that these are fairly robust machines, and leakage might be no more than the door seal. Check the seal and reposition it if necessary, as they not only tend to flatten out, but they also tend to pull out of their grooves holding the seal in. It seems that in making the "tall tub" types, there is less space between the racks and the seals. Larger objects, especially on the upper rack, can bump the seal and pull it out of position a bit, creating a leak. It doesn't take much. If you bought your machine from one of the major hardwares, and you got the extended warranty, they will make three attempts to repair the unit, then replace it if unsuccessful. Hope that this was helpful to you. --W-D--Please feel free to rate this solution. Thanks.
try this. I have a similar problem and now have the LE code flashing. I saw this advice and am going to try the fix now.
You are barking up the wrong tree. Here is the real fix for the LE
problem.First disconnect all power ( power supply, circuit breaker,
wiring etc) to the machine. Disconnect all tubing to the machine (
drainage pipe and braided hose feed) Then you need to take out the
dishwasher, turn it over and then remove the large white sensor tray
that will expose the leakage sensor held on by 2 screws. Remove the
screws and dry up the sensor tips (4) with a dry towel and dry up the
tray all around as well. Replace the tray and re connect all tubing and
power. You're problem should be solved and you just saved yourself a
pile of money in service repair bill.
M.D.
hti had athe same problem, and the fuse fixed it. it turns on now,
you can get to the fuse casing, small tube about 1.5 inches , black, by flowing the electrical line to the, inside , or the under carriage, on the side of the bottom of the unit. 15 amp 250 volt at radio shack.
Try unplugging the unit for a few minutes. Then plug back in. If not try the Power button. I have an SE code (drainage problem) and my machine stops running altogether.
unplug the unit from the wall.take a strong flash light look into the unit. there is something in there.the braker shut-down only when the motor is over loasded. meaning, there is something holding the blade.
×