MOTOROLA H300 TRYING TO CONNECT MY PHONE AND BLUE TOOTH

Hi,it all depends. When you want to connect a blue tooth to a phone, You will need to switch on the blue tooth device and the phones blue tooth you are pairing with.

When pairing both device, you will ask for pairing code, You four digit numbers(default code(0000). and pair.

After pairing both device, you detected paired, you can now use the blue tooth device with your phone.

there are no special code for pairing Blue tooth device.
Normal codes used are any four digit, four numbers you want to use.(0000, 1234).

Hope it helps..

Thanks for using fixya...

hi

when the bluetooth id discovered it has to be registered with the default code of 0000 over the handset to be paired

hope this helped
cheers

1.Press and hold the Multifunction button in the middle of a boom headset while the headset is closed. The light will glow blue.2.Open the boom microphone and the blue light should remain on. If not, repeat step 1.
3.On the cell phone, press Menu > Settings > Connection > Bluetooth > Handsfree > New Device
4.Select H300 once a connection is detected.
5.The passkey "0000" is now entered to confirm the connection has been made.
6.The cell phone screen will now read "Bluetooth Connection".

Tips:
1.Provided you set the Bluetooth power to "On" after the initial connection has been made, the phone will automatically re-connect to the headset.
2.To set the Bluetooth power on - Press Menu, Select Settings, then Connections, then Bluetooth link, scroll to Setup and select that. Scroll to Power and chose Change. Scroll to On and press Select. The screen should now read "Changed: Power On".
3.Test Your Connection: Close the headset and watch for cell phone to say "Disconnected". Re-open the headset and the phone should be connected automatically and will now display "Bluetooth Connected".

please give good rating if the solution works.
Thanks for using FixYa.

You have to hold the on button until it is a solid blue light not flashing 5 or 6 seconds then it is ready to be paired.

The Passcode you have to enter on the phone is 0000 (zeros not o's).

It should just be a manner of turning on the media player on the phone and pressing the button just the left of the roller ball (it's got 7 dots on it) and sending using bluetooth while the headset it on.

Checked the volume on the headset? As well the volume on the phone

Make sure that your speakerphone is OFF.

H300- Hold call button in until blue light goes solid. Then set your phone to find device and click connect. Works good on my Blackberry

Try resetting the Bluetooth setting under settings and tools. Let me know if this works.

Cynthia