My lg flatron l1953s does not power up. the power cable is not broken or cut. it sents power but my screen doesn't power up

LG Flatron L1515S doesn't need a driver to be installed on Windows Computer or any other systems. If you have problem with it, then it should be your graphics driver that you would need to install.
Similarly W1943TB-PF doesn't need driver. (I am not sure which one among the two LG Flatrons you have since your question is tagged under the LG Flatron L1515S while your problem refers to LG Flatron W1943TB.
If you have other problem, let me know with more details.
Good Luck.
Thanks for using FixYa.

shut down the computer completely by pressing on the power button until no sound is heard. Then make sure that the screen is properly connected to the computer and turn on the computer. If this doesn't help, disconnect the cable that connects the screen with the computer, see that the connection looks fine (no broken pins) and then connect again to the computer.

Actually, you should be able to use the monitor without installing a driver. If it isn't recognized automatically, just set the resolution to 1280*1024 pixel and set the screen refresh rate to 60Hz:
In Windows XP right-click on the desktop, open the Properties dialog, select Settings and set the screen resolution. Click Advanced, select the Monitor tab and set the screen refresh rate. If the proper resolution was not available in the first dialog, uncheck "Hide modes that this monitor cannot display" and try again.

That being said, there is a "driver" package, also containing a color profile, available from LG here.

If this doesn't help, describe your problem in detail, let us know your operating system and which which monitor you are currently using.

hi,

check first if the connector has no connector pins wha are broken or shifted. if not chack cable for hard nobs or turns maybe cable is interrupted.
take other schreen to check VGA output of PC.
if all this not helps mail me back
greetings cis

here's a link for one on ebay: http://cgi.ebay.com/Power-Adapter%3a-LG-Flatron-575MS-LCD-Monitor-(12V-4A)_W0QQitemZ370109233697QQcmdZViewItem?rvr_id=&itemid=370109233697

you can also google the following: LG flatron 575ms power cable

there should be several listings

are you getting a check signal cable message? any on screen instructions?

try the cable, if it works on another monitor, then sorry to say but your monitor is fried

I had the same problem with my LG Flatron (not the same model as your one). I fixed it by connecting both the digital and analogue cables from the pc. Presumably, the problem occurs because the monitor is not receiving a digital signal.

change the power section capacitors..

Sir,
I hve read all above statement which shown as above. but in my case monitor take time to ON and display the screen, its take at least 45 minutes to start up and display the window screen. So please to send me solution about my Query.
Thank's

if the monitor showing powersaving mode, monitor is ok. It must be your CPU complaint.