Why my wifi doesnt work anymore, it was working yesterday with dir 615

The new firmware is available with instructions at Dlink's Website.
http://www.dlink.com/us/en/support/product/dir-615-wireless-n-300-router



This is the english address for the support on your model of router.

There should be a small reset button on router which will reset to default,u will need. A pencil or similar to press it, the default username is usually admin and password is. Admin

Please use the utility disc that comes with your printer. It will help you to connect your printer to your wifi router.

Or please check if you type the correct SSID of your wifi (Wifi Name). SSID are case sensitive.

view this http://superuser.com/questions/152499/dlink-dir-615-suddenly-stops-working-orange-internet-light

hold the reset button on the back of the router for 10 seconds and the router should reset back to factory settings and you have to set it up again. Here's the manual though. bottom of page 62. instruction if you forgot password. But it works the same.

http://static.highspeedbackbone.net/pdf/D-Link-DIR-615-Manual.pdf

WPA2 is usually set by the end user. We cannot really help you with finding the WPA2. Consult your documentation and if need be customer service to assist you with finding it, or resetting the adapter.

The dlink dir 615 wireless router hasnt got wps. So its no good trying to connect it via that way you can only do it via wep or wapor wap2 here is a link to the manual for your router http://static.highspeedbackbone.net/pdf/D-Link-DIR-615-Manual.pdf

1. check connection by 1st pinging the network card That is go to the dos window and type " ping 127.0.0.1 you should get 4 replies.
if not then you need to check the driver set for you network card.
2. check the ether net cord with a know good one
3. reset the router by unplugging it and reboot the pc
4.Call your ISP to check for outages
5. check the power adapter it may be faulty.

hi.. all,

i am facing the same issue.. my new DIR-615 , when plugged with power cord ... make the power led blink continuously... and hence so, no network is accessible neither wifi works in simple terms noting works, no combination of power cord with network cable with computer works.
i have even tried resetting using the reset button.. but still the power button keeps blinking.
and yes it was working in past, its a brand new product(3 months old).
Please help and its urgent..
thanks a lot for your help..
Regards
Dharmendra

hii, i had the same problem, if you have a gateway (modem) you can join them together and turn the modem on and wait for it to finish starting then turn your dir-615 on, and you shouldnt even have to configure it, it should just work, it did for me.