In Konica Minolta bizhub 210,162,211,163,182, error code
"cof32" means "Automatic toner density control abnormality. To remove this code or you want to get rid of this problem,
simply call your technical service representative to solve this problem. If you want to remove this code by yourself then please
perform these actions attentively. 1-Turn the machine ON. 2-Press "Utility" button on front panel. 3-Now press these buttons "stop+0+0+stop+0+1" it means press
stop button, then press 0,again 0, then again press stop button, then press 0, and
1. 4-service mode will appear on LCD screen. 5-Now with the help of arrow keys go to the 2nd
option which is "ADJUST" 6-Now press "YES" button. 7-Again by pressing the down side arrow key go the option
which is "ATDC ADJUST". 8-Press YES button. 9-Now increase the value, for example if the value is 145, you have to enter 155 or
160.enter the value with numerical key pad buttons. 10-After entering the new value press "YES" button. 11-Restart the machine.
COf32 error resolved. Other machine. Develop Ineo 161 "Caution! Service Call (M1)" What do I do with it. To start off, the machine spins and stops. Please help me!
1-Turn the machine ON. 2-Press "Utility" button on front panel. 3-Now press these buttons "stop+0+0+stop+0+1" it means press stop button, then press 0,again 0, then again press stop button, then press 0, and 1. 4-service mode will appear on LCD screen. 5-Now with the help of arrow keys go to the last option.which is "Clear Data". (6) Now select "Memory Clear", clear the memory by clicking "Yes" or "OK" button. Wait for a while, a new code will appear on screen. Now again go to the service mode and go "ADJUST" option and with the help of arrow key select "Model setting" option and press "OK/YES" button. Now in the model setting menu select "16" which is the copy per minute speed of your photocopier machine. Select this option and press "OK/YES" . Now restart the machine.it will be ready to use.
i tried but not working
in step number 7 ATDC gain instead of ATDC ADJUST
step number 9 what is value of bizhub 162
When you are adding new developer to the machine then you have to start "ATDC ADJUST" and if you want to increase the ATDC gain then you have to go the option "ATDC GAIN" nad then increase the gain. Step number 9, The value of ATDC gain varies, normally its value is 144 to 145 it can be 134.These values are automatically adjusted when you start ATDC adjustment.If you want to know the default value of bizhub 162 then it will be 144.
pls i tried all the steps both first and second but it still writes machine trouble service call(cof32) what do i do next?
obrigado, funcionou sim perfeitamente
×
8,509 views
Usually answered in minutes!
×