Sony kp-53hs30 projection tv

Hello Sarah!
There is no bulb to replace in your TV. Image is created by three CRT's and you don't want to replace them, just trust me on that one. It could cost you up to $1800 to do that.
All you can do is to clean lenses of those CRT's. You have to disconnect TV from the power outlet and remove rear cover. Using very soft brush and vacuum cleaner remove dust from Red, Green and Blue CRT lenses. Do not use solutions unless you got something special for optics. Solutions will leave film on the surfaces. That would improve brightness and contrast of image.
To adjust focus front grille have to be removed. Than central piece cover held by 5 screws. Behind it you can locate black plastic "box" size little smaller than cigarette pack. there are 6 adjustment "screws". Three of them are "screen". You don't touch those. Another three "focus" there is one for each color. Turn TV on. Hit "menu" button. And adjust focus for each color separately. If menu goes away hit it again.
This is the only improvements you can do.
Everything else will involve humongous amounts of cash.
Good luck!
Russ.

Its nice to save money but unless you know what you are doing and have the right soldering equipment its best to leave this to a pro. you can open your tv and inside there are two large ics labeled STK 392-xxx those are where the problem is , however with sony tvs there are fuses that need to be replaced and possibly some resistors,. have a tv shop repair your tv. Julio - Millenium TV in Las Vegas

My picture screen has double images red,blue,green. The screen looks 3D

if you are using component cables, make sure all are plugged in on both the back of the tv and the cable box. (component cables will have a red and white audio and red, blue, green video)

Projection TV sets are known to have two common problems. The first problem that is common to these sets is convergence failure. When this happens the TV will usually look 3D, Wavy/Distorted, etc. It may also shutdown and blink an error code.

The second common problem with Projection TV sets is dull video, halos around objects, white looking video, or red overpowers the screen. This is commonly caused by the fluid in the lens being clouded overs.

You can find more details and solutions here on Fixya at the following link below. Or click HERE


http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Pink? If this is a retangular box that appears then I would suggest to look into the fact that you have turned on "TEXT" mode within the "CC" closed caption settings.

Go here for a detailed adjustment that may fix your problem

http://www.somelifeblog.com/2007/06/sony-projection-tv-red-line-repair.html

There are products such as VideoSecu PC to TV Presentation Converter. I haven't used them. I'm not sure you are going to get the resolution that you want. A DLP projector does a pretty good job. I know that is not what you are looking for.

Type "PC to TV Converter" in Google. They are about $40 to $60 bucks. Before you buy one, read the reviews.

I have a Philips Rear Projected TV and the time mine did something similar it ended up costing me $400 NZD to get the main board replaced. Sorry samsunwest, you may have to call in a service agent to take a look. It would be worth your while checking out the warranty for your Sony before you call though as it could possibly be under warranty.

The model number is KP-53HS30, the screen is blurry displayin colors of red green pink