My pc have an serius error when my pc start it will log of after 5-10 minuts please give me solusion

Hi,
This may be an issue with your Keyboard. Just try the following step.

Open RUN from the START menu, type devmgmt.msc, this will open the Device Manager. There you can find out the keyboard, expand it and you can view the full name there. Right Click on that and select UNINSTALL. Now reboot your PC and log in again. Check whether the issue continues or not.

If still facing the issue you need to contact the support center for repairing it.

Please let me know the status.
Thanks for using FixYa.

please provide more info about your problem . what are you trying to log in to what id the pc doing when you try to log in and if there are any error codes write them down and provide them

give me the solusion of error code 225 of machine cannon 7086
reply plzzzzzzz

Try cleaning the print heads, you should find how to do it, by referring to your instructions.
Please rate my solution.
Thanks.

Starting Adobe Photoshop Elements, the Editor returns the error message "Unable to continue because of hardware or system error. Sorry, but this error is unrecoverable," and the Organizer returns the error message "Interface not found."

Solution: Enable the Event log service.
1. Choose Start > Settings > Control Panel.
2. Double-click Administrative Tools, then Services.
3. Right-click Event Log and select Start.
Note: The Event Log can only be disabled in the Microsoft System Configuration utility (msconfig) under the Services tab, but should never be turned off.
Background information
The error messages "hardware or system error..." or "interface not found" when you start either the Editor or Organizer indicate a system level problem. These messages display if Event Log is disabled. The Event Log is a Microsoft service that should never be disabled.

If you found this information helpful, please give me a big thumbs-up when you rate my answer. Thanks!

Displayed when communication error has occurred between Main Microprocessor and Timer Microprocessor.Hold down [POWER] until unit powers off. Unplug AC power cord for five minutes then reconnect. If issue still exist have unit service.

The H2TestW test program gives failures. That means that there are serius errors. Which errors does H2TestW give?
Try to reformat the FlashDrive. If that fails too, the drive is faulty and should be replaced.

it is a fiser related error, you need to reset error code servie mode.
* 28* will put you into service mode,
then choose copeir, option, clear, then clear error, highlight that press ok,
then restart machine.

In HP prolliant server sets, setup also logs system events. This error is due to that log. Enter setup, trace log and clear all events.

visit some solus for same.... u might be knowingall these . still have a try
bye]

http://ycoderscookbook.com/tutorials/999_Error.html