You had to transfer the design into your memory card from your pc.
now,you can use your pc card adapter to transfer that design into your machine.
1 thing more understand that you transfer nothing into a thing like pc card adapter , you transfer it into memory card and make this memory card read to your machine by pc card adapter
i have checked and your machine supports .jef format so there is no compatibility issue.
see, The actual process is this
1.Included is a 256MB CompactFlash memory card to store your embroidery
designs.
2.With the USB CompactFlash Reader/Writer, you will be able to
download designs from the internet and save them to the memory card.
3.With the PC Card adapter, you will be able use the designs on the Janome 9500, Embroidery Machines.
this will solve your problem.
Please accept this solution if you are helped.
Thanks
OK!!!!
if you adopted right procedure we need to know problem area
there is no issue of formatting the memory card.you can use the memory card reader to check whether design is present in the memory card or not . Also tell me thet whether the machine show the signs of card being read/dectected or not.
check some other designs in other formats also you should try some other memory card may be from your phone or camera to see whether your memory card is fine and machine is reading card or not.
once we know the problem area we can proceed next
×
340 views
Usually answered in minutes!
i used the reader/writer to save the design on the memory card and used the adapter to insert the design into the machine. If the machine is reading the card, no design shows in the display therefore it apparently isnt reading the card. Does the memory card have to be formatted before i save the design?? Your solution didnt help me. I already knew that information.
×