Canon mp258(ciss) error 05, sometimes it prints but most of the time it has this error, iv fixed it by ejecting the cartridges and cleaning it. but again it has the error. pls help me solve this. thnx a lot...URGENT

google canon web page for full list of error codes and fixes

Hi, My name is Liam from rihac, although we do not sell printers I work very closely with them via our inklink products. When a printer flashes 4 times this is a sign that an ink tank is not installed correctly or that the cartridge will need to be replaced as it is low on ink. As you are using a CISS the cartridges will always have ink in them. To bypass this error all you will need to do is press and hold the RESUME button on the printer for 10 seconds and this will turn off the cartridges ink status monitor and allow you to continue printing.

Canon Error Codes

I hope I was of help to you

Solution

1. Press START - Devices and Printers
2. Right-click the Canon MP258 series - select Printing preferences
3. Click Maintenance - Cleaning
4. Select All Colors BK, C, M, Y - Execute
5. Wait until the process is finished (Do not start another operation until the cleaning has finished).
6. Click Print Check Pattern OK




If the results print out like this, there are two possibilities:
1. Red ink in the cartridge runs out. Solution: injecting with red ink
2. If the red ink has been filled, and check pattern is still not out, meaning the color cartridge error. Solution: replace the cartridges

Error Code E05 Canon MP258 may solve by the following steps.
1. Press Stop/Reset button for 5 seconds.2. After five seconds release the button.3. Now your printer will start its process and it is ready to use... thanks

series MP258 printer. According to my experience of Error P10 can be solved by replacing one or more of the following spare parts:

• Cartridge PG810 or CL811 (can be both).
• Carriage unit complete with its head cable.
• Logic Board.

Canon PIXMA mp258 is a series 3 in 1 printer (print, scan, and copy) in lieu of MP145 and mp198. MP258 printer cartridge uses PG810 series (black) and CL811 (color) so different from the series MP145 and mp198.
It had been several times we found the damage Error P10 (on display) for the series MP258 printer. According to our experience of Error P10 can be solved by replacing one or more of the following spare parts:

• Cartridge PG810 or CL811 (can be both).
• Carriage unit complete with its head cable.
• Logic Board.

Check that easiest of starts before the last of the cartridge until the logic board

• kishor kumbharePrinter canon mp258 scane problem error code 2,140,2
  May 05, 2013
  
• 
  kishor kumbharePrinter canon mp258 scane problem error code 2,140,2
  May 05, 2013