Align cartriges message continuously displayed

Hi,

Your printer is in Error mode.. Specially with black ink empty message. HP Printer is designed in such manner that it will not allow you do to anything if it gives cartridge error message on printer screen.

you will have to replace the cartridge and align the printer to get it working.


Regards,
Ron

Press menu and then press the Right Arrow key until you get to maintenance screen then press enter.
Option 2 is you align print cartridges.
Automatic cartridge alignment
Perform the following steps to align the ink cartridges:

1. Disconnect the power cord from the unit, wait five seconds, and then plug it back in. This will reinitialize the unit.
2. Print another alignment test page. If the Press Enter to align message is not currently on the front panel display, complete the following steps to print an alignment page:
1. Press Setup or Menu on the front panel (depending on the model).
2. Press the right arrow button (>) until Maintenance or Tools is displayed, and then press Enter or OK (depending on the model).
3. Press the right arrow button (>) until Align Print Cartridges is displayed, and then press Enter or OK (depending on the model).
3. To determine if the automatic alignment is functioning correctly, look into the output tray as the alignment page is printing; a blue light should be visible periodically on the page as the cartridges move back and forth. If this light is not visible, the product will not be able to align the cartridges and will require service. Service the product.
4. If the blue light is visible and the alignment pages are printing correctly, but the alignment pages still fails, there still may be a hardware problem with the unit.
If there are no other printing problems and you wish to continue, use the information in the Bypassing the ink cartridge alignment section below to bypass the alignment. The information from last successful alignment will be used.
If the message keeps reappearing or other print quality problems occur, service the product.

you need to align your printer cartridge, to align the cartridge go to start button on your computer desktop then click the setting and choose the printer and faxes then right click your installed printer HP 6110 then choose the properties of your printer then you click the maintenance menu then you see an option to align your printer cartridge...just click it and wait until finish aligning your cartridge..

did the printer print out an alignment sheet?if so align on scanner bed should show on your computer using printer options under your software program

Replace all carts with new ones to turn the message off.

Very good help page over on the HP website. If you can't seem to get it to work, they also tell you how to bypass the "align print cartridge" message and get back to printing again...

Support Page of HP site

open the cover, make sure your cartriges are properly seated. it will proabably still ask you to re-align the cartriges. all this does (usually) is print a page and then ask you some questions about thw eay that page printed.
also, try turing you printer off and back on. (resatarting your PC with you printer may also help somehow, but that's pure unfounded speculation based on the experience that restarting the device usually fixes it...).

it is necessary to place the allign page in the scanner and then press the enter button and the scanner will read the allign ment page as it will take 2 minutes and then it will display the message allignment complete message then it will become normal as it was .so after u get the allignment page place it in the scanner unit of the printer and then press enter.

You can also bypass the alignment. When the message for alignment displays on the display => Press Setup and Options (or Copy Options ) simaltanious.The last known alignment is used when the alignment is bypassed.

Press and hold " setup" button then press " option "  will skiip alignment