The UV-visible spectrophotometer(Cary 100 Bio, Varian company) in our lab is now showing faulty error while starting the instruments. It says Error Code: 9:9330SEQ:E9330, chopper not upto speed. Where to contact for help or can you help me fixed this problem? Any faulty operation caused this problem?

Family error code E60 is visible to customers and (could be E61,E62,E66,E68 and E69 only visible in service mode) means problem with heating phase.
Possible failures : heating element faulty, NTC sensor faulty, PCB faulty, wiring.

Dado

je cherche une notice du spectrophotom?tre Hitachi U2001 en Fran?ais. j'ai une panne sur cet appareil et souhaite faire un premier diagnostique. Merci

spectrophotometer in our lab. When it is started, it displays' "selftesting monochromator err".Please help and guide me to diagnose and rectify problem. Please reply me at this email address. [email protected]

He's not talking about a washing machine. It's a laboratory spectrophotometer posted in the wrong section.You'll have to send it for diagnosis and repairs. Our lab's 520 gave the same error. Estimated repair: $2-5000.

a spectrophotometer is an instrument used to determine the intensity of various wavelengths in a spectrum of light

Csi Dna Laboratory Instructions - Website of letosaga!

letosaga.jimdo.com/2012/10/11/csi-dna-laboratory-instructions/

Oct 11, 2012 - The kit offers instructions for conducting 10 experiments and provides.... Comments about Bowen Hill Edu Science CSI DNA Laboratory Kit: ...

Instruction manual for csi dna lab kit - Fixya

www.fixya.com/support/t11150204-instruction_manual_csi_dna_lab_kit

Jan 5, 2012 - instruction manual for csi dna lab kit - Planet Toys Csi Dna Lab question.

[PDF]Crime Scene Investigator PCR Basics™ Kit - Bio-Rad

www.bio-rad.com/webroot/web/.../10002461.pdf

Bio?Rad Laboratoriesreal-world forensic science labs. Bio-Rad is ... TH01) actually used in forensic DNAprofiling; the DNA sequence at this locus contains four ..... Much of this background information is provided in the instruction manual and the appendices.

Here is a schematic of the order of the media.
AN-315 - FishMate 3000 GUV - 16 Watt UVC + Bio Pond Filter
Click to close

its a detector fault ,i could look it up if you want

Barry Wilkins

The listed error message is accompanied by the error code "58:10"

This error code can mean one of two things. Either the color sensor (the spectrophotometer) is malfunctioning - in which the error code would persist and a technician would need to be called. Or the sensor picked up a piece of lint or dust when doing its self-calibration - in which case it would come up as a single occurrence.

Here is a follow-up suggestion if there was any further concern. With the following steps, the spectro instrument (along with the print head) can be inspected. To do that, select "Replace print head" from the front panel and then turn of the power (hard switch on the back of the machine). With the printer off, open the tinted glass and slide the carriage over. This should allow the carriage head with spectro instrument to be brought into view for inspection of an lint or dust, etc. To restart the printer, just close the tinted glass and power the printer back up from the hard switch.