Code to program my RCA Universal Remote to work my Jwin DVD Player

To program your RCA universal remote to control your Naxa DVD player ND-861, you will need to use the correct code for your device. Here are the steps to follow:

Power on your Naxa DVD player.

Press and hold the "Code Search" button on your RCA universal remote until the indicator light turns on.

Release the "Code Search" button.

Press and release the "DVD" button on your RCA remote.

Enter the code for your Naxa DVD player. You can find a list of RCA remote codes for Naxa DVD players in the RCA remote manual that came with your remote or by searching online. For example, the code for Naxa DVD players may be 3394.

Press the "Enter" button on your RCA remote. The indicator light on your remote will turn off if the code was entered correctly.

Test the remote to see if it's working. Try playing a DVD and using the remote to navigate the menu.

If the first code you tried didn't work, repeat the steps with a different code until you find one that works. If none of the codes work, it's possible that your RCA universal remote is not compatible with your Naxa DVD player.

Remote code for HP BD-2000 Blu-ray player - AT&T Community

https://forums.att.com/.../Remote.../Remote-code...BD-2000.../467...

AT&TDec 2, 2012 - I have an HP BD-2000 Blu-ray player that I recently lost the remotecontrol for. I do not see HP as a manufacturer on the DVD list when I try.

Universal Remote Control Codes List - TV SAT DVR ...

removeandreplace.com/2013/11/10/universal-remote-control-codes-list/

Nov 10, 2013 - We compiled this universal remote programming code list to make it ..... Looking for a code for a orion vcr I have a 5 digit universal remote by rca -rcrn04gr and I ... remote control code (s) for a samsung blu ray dvd player bd-fm51 /ZA ... Please, could someone to give me the code for DENON AVR-X2000.

Programming the RCA RCRN04GR Universal Remote

voxrightnow.custhelp.com/.../programming-the-rca-rcrn04gr-universal-r...

Jul 28, 2010 - Program your Remote. To use this universal remote with your home entertainment system, first you need to program it to control your devices.

[PDF]Rcrn04gr - Universal Remote Control Codes

Hello
Setup codes for Magnavox DVD with RCA RCU-404 universal remote control are:
057, 060, 074
OK.

Hi,
To get the code please go to below website

http://remotefinder.rca.com/default.aspx?site=rca

Please
Provide model of your remote
device to be programmed (VCR,TV)
Make name(toshiba,sony)

Thanx

With the TV on, I pointed the remote at the TV and kept hitting the on/off on the remote until the TV turned off. When it did, I knew that was the required code so I hit the stop button on the Universal remote. I did the same procedure with the DVD/VCR player and now they all work fine.

the codes for Prima tv using universal remot control

jWIN products do not have a series of uniformed universal remote codes, therefore, they can not be provided at this time.

i need a universal remote that can work for a jwin dvd player

I finally found a code that works. Code 3144 worked. I am using the RCA universal remote control RCR412S and RCA DVD player DRC200N. The code 3144 is listed under Memorex in the code book that came with the remote control.