I have a homelite trimlite trimmer model UT20006 can you tell me which way the connecting rod goes by the part number on bottom rod bearing?

on the side where the pull cord was remove casing pull the cord through the hole on the casing wind the spring back on the strimmer not to tight but tight enough for the cord to return once pulled. Attach the cord onto the spring this will be obvious there is a little hole the cord goes through then pull a bit of cord through tie a nott then pull the cord back so the nott is tight against the spring ,let the spring spring back the gord shoul wind onto the spring reattach the casing and job done hope this helps

50:1 2.5oz. of 2 cycle oil to 1 US Gallon of gas.

Jim

Here is a link to one of my Tips: www.fixya.com/support/r6270682-trimmer_weed_eater_string_replacement

If you need more help, let me know.

Good Luck!

Jim

50:1 petrol/oil

http://docs.google.com/viewer?a=v&q=cache:gez_QotI2HkJ:ipl.ordertree.com/ipl/338/UT20004A_24A_44A_685_eng.pdf+homelite+trimlite+manuel&hl=en&gl=us&pid=bl&srcid=ADGEESjYoEmqbDTW9YxRajkdBOlyuM0QdOAJ_IaDGa1FZcpdF45MaCC9o7AuF2DQOWwV4jGh_C6iP7hzhTQkDreYz2qVBSNtcFiQIs0LdZoRQJi1cwSYGEnEV1H6NFkHwNUAl2axj1uy&sig=AHIEtbRXhjlqA0rUAC7zcHsMGLQzgOAJAw

Dirty carb or adjustment needle. Or adjustment no good on carb.

PUT THE WHEEL BACK ON BUT CANT PULL THE STRING COULD THE MOTOR BE FROZEN???

The same thickness as a buisness card work great

you can take your trimlite in to your local hardware store and match the screw right there in the store or go on line to homelite dealer to order. hope was some help

Hello daniel_s_kmi:

If I Understand you, you are Looking for the Part Number for the Complete String Head.
If this is Correct, then the Part Number is DA3001A.
>>You can View a Breakdown of this Unit at this Site Addy; http://www.homelite.com/service_support and Select Order Parts. Now Select "Click to Launch Homelite Catalog". Now Enter the Model Numbers (UT-20721) and Click Search. Now Double Click on the Model in the Results Area. Now you can View the Breakdowns for this Unit. Select the "Shaft-Spool and String-Grass Deflector" File. The Complete String Head is # 17 in the Breakdown.
Please, Do Not Hesitate, If you Hit a Snag or this Does Not Correct the Problem, I am Here if You Require More Assistance.
Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Be Happy. Thanks.

Good Luck

Respectfully

jbridger (John)