Anytime I turn on Webcam and the mic on this unit the receiver is hearing a lot of noise coming from my end

Unplug it and plug it again.... A calibration screen will come out. Adjust the mics sensitivity accordingly.

This is fault on the MIC within the unit. Now uninstall the driver software, remove the webcam and then reinstall the drivers once again.Now connect the web cam and open the properties settings on the webcam . check for normal settings . If the fault repeatsthe webcam must be rechecked on another PC. Take opinion to consult if the webcam is under warranty

Have you set the mic you wish to use with your webcam as Default ?

XP
Plug in your webcam or headset or mic you wish to use with your webcam
Control Panel (Classic View)
Open 'Sounds and Audio Devices' folder and click on the Audio tab - make your preferred mic the default device in the 'Sound recording window'
Open 'Volume' below the window to ensure the mic is not muted
Click 'Apply' and 'OK'
Restart your computer
Configure the webcam / mic to your chat program

VISTA
Plug in your webcam or headset or mic you wish to use with your webcam
TEST SPEAKERS
Right click on speaker icon in System Tray or from Control Panel
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
Right click on the volume graph and select 'Show disabled devices' and 'Show disconnected devices'
To set your preferred mic as default - click the mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

Configure to your chat program

in control panel >> sound setting >> check wether mic boost is enabled or not if enabled then uncheck and disable the mic boost

chek the mic setting. and adjust the mic volume.

go to the sound icon on the lower right of your screen and make sure the mic is not muted... you may have to look in the menu for additional controls.

Robert

Please take a moment to rate this solution thanks

If you have another Mic I would use that. Otherwise I don't know how to solve this, check out this page though http://support.microsoft.com/kb/921334

Under cause there is something about disturbances by monitor, router, televesions and speakers. Try getting your camera away from other things and see if the audio straightens out.

un cheak must plug it in or unplug it from mic input and plug back in tight cheak again might be bad mic then u could get a 10 doler one plug back in mic hole use cam for video only

Hi manolopzo,

there is some pormenors that we can't never forget: see the record level of your mic and the distance between the mic and the speakers. if the distance is litle and the record level is high, you'll always have that feedback sound.

complements

1.Check whether your cam has built in mic.
2.if then connect the mic signal cable to the MIC in connector in your sound card.
3.if your webcam doesnt support MIC functions. Connect the head phone with mic to mic/audio slot
4.if you have already connected Mic. then the problem with the sound card settings in the instant messenger menu.
5. Specify proper sound card manufacturer in the audi settings found in the preferences or options or settings menu in IM software.
thank you !