Hi my GE profile Air conditioner just stopped working. It turns on but it isnt cooling down the air, what should i do?

Here are the steps to program your GE universal remote (model number 24922cl57252) to work with your Solace Air portable air conditioner:

1. Turn on your Solace Air portable air conditioner.
2. Press and hold the "Setup" button on your GE universal remote until the red indicator light stays on.
3. Enter the code "991" using the number buttons on your GE remote. The red indicator light will turn off.
4. Press the "Power" button on the GE remote.
5. Press the "Up" or "Down" button to try and turn the air conditioner off. If the air conditioner turns off, press the "Setup" button to lock in the code.

If the air conditioner does not turn off, repeat steps 2-5 with a different code from the list below until the air conditioner turns off:
Solace Air Portable Air Conditioner Codes: 0277, 0363, 0364, 0365, 0403, 0454, 0455, 0456, 0457, 0474, 0475, 0494, 0495, 0496, 0497
I hope this helps!

sounds like you are overcharged or possible blockage.

If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79

Hi,

Here is a tip about troubleshooting your air conditioner...
There are many things that can cause your air conditioner not to cool...

AirConditioner Trouble - Review the Possibilities

heatman101

Hi,

Here is a tip about troubleshooting your air conditioner...
There are many things that can cause your air conditioner not to cool...

Air Conditioner Trouble - Review the Possibilities

heatman101

check that your dip swtches are set right

Hi,
Here is a tip about trouble shooting your air conditioner...

Air Conditioner Trouble -Review the Possibilities
http://www.fixya.com/support/r3571569-air_conditioner_trouble_review_the_possi

heatman101

Hi,
Here is a tip about trouble shooting your air conditioner...

Air Conditioner Trouble -Review the Possibilities
http://www.fixya.com/support/r3571569-air_conditioner_trouble_review_the_possi

heatman101

Hi,
Here is a tip about trouble shooting your air conditioner...

Air Conditioner Trouble -Review the Possibilities
http://www.fixya.com/support/r3571569-air_conditioner_trouble_review_the_possi

heatman101

Sounds like the switch is wired wrong.
When you put the switch on fan only the compressor should not run at all, therefore their shouldn't be any cold air.
Check the switch to see if it's wired right.

Heat pumps have saftey circuits that prevent liquid flooding of the compressor. Inadequate airflow across the evaporator in cooling can trip this circuit. Have your package unit serviced with particular attention to cleaning the evaporator coil and be sure your filters are clean and changed frequently in the summer months. Hope this helps GL!