Sir, The phone and base are the same. I have good dial tone. When I go to dial out, the tone never changes and the call does not go through. I cannot receive incoming calls, even though the phone rings.
How many handsets do you have on this system? Just the one for the base unit?
Hi there,
check the phone switch, if it is on a pulse tone or in dial tone..
`jack
Try calling the GE helpline at 800-448-0329
You can also contact the customer support HERE. (web based support)
Or call 1.800.448.0329 Monday thru Friday, 8am to 8pm Eastern, Saturday and Sunday 10am to 7pm Eastern.
Please do not click the Accept button until you feel your issue has been resolved. If you do, it is understood that your issue is resolved, and you may not recieve further support.
@mattozan: Sorry mate, nothing personal or anything, just trying to educate the customer about how Fixya works :)
×
SOURCE: UNIDEN 5.8 GHZ CORDLESS PHONES
Registering Handsets to the Base
Whichever handset you choose to charge in the base is automatically
registered to the base. Any additional handsets must also be registered to
the base before you can use them.
Be sure both handsets are fully charged.
One at a time, place each handset in the base. The charge/in use LED on
the base begins to flash, indicating the base is registering the handset.
Wait for at least five seconds, then pick up the handset and press
[talk/flash]. If the display shows TALK, the handset is registered. If not,
place the handset in the base to try again.
Press [end] and continue with the next handset.
Note:
Once both handsets are registered, it doesn’t matter which
handset is placed in the base or the charger.
When you charge the handsets, Caller
ID summary screen and the name of
the handset appears.
This can be find from uniden website.
http://www.uniden.com/pdf/DXAI4588-2om.pdf
SOURCE: Uniden cordless phone. No dial tone.
Hi peddler65, did you plug your phone into another area to see if there is a dial tone. Then if not call the phone company or find the D-mark (where your dial tone ) comes into your home and put a jack on that and plug a phone in with all phones
in the house unplugged.
Thanks.
SOURCE: uniden 5.8Ghz phone.
You need to reset the main base unit. Unplug the power from the back of the base. While the power is disconnected, press and hold the delete key while reconnecting the power. Wait for a long beep tone. When the display shows 88 or P, press play button one time. If you have a phone without an answering machine, disconnect the power from the back of the base, press and hold find hs button while reconnecting power.
499 views
Usually answered in minutes!
Just the one.
I called GE and received the following instructions. Unplug the electric power and the phone line. Disconnect the battery in the hand set and let sit for a minimum of 15 minutes. I did this, hooked everything back and the phone reset itself.
It seems to me that one of you experts should have known this method. What did I pay my $9.95 for? I had already gone to the GE web page and had the hotline number to call next. Hmmmmmmm.
Thank you Jack. Did you read my comments posted on May 22nd?
×