Pearl 8100 i just got my phon today and ive been charging it for over 4 hours now and it still wont turn on a red light keeps flashing what does this mean

The flashing red light is telling you that the battery is almost drained down to capacity and that the phone must be plugged in now. When the charge is this low you are going to have to leave the phone recharge for at least 12 hours before trying to use it again. Once the phone is turned back on, the phone will reset itself. Good luck.

This is an hardware failure issue you need to walk in to the nearest service center to get it repaired.

your battery full dowen seperate boost battry after charge your phone

The red light is telling you that your phone is on. It will flash regaurdless if you have a text or not. When you charge it the light turns green.
Thats how they're made :)

There are no special ways of turning on the Blackberry.

Simply power on - it is fully charged - if this doesn't work, remove the battery for a couple of seconds and re-try power on.

my phone wont stay on and when it does come back on it shuts right back off. the LED light on the front keeps flashing red. ive taken the battery out and everything and nothing seems to work. help please!

Red light usually means low battery so leave it for a hour or so red light should stop.

Try removing the Sim card and re-inserting it.

I have a new blackberry pearl, have had it two weeks and today it will not charge no matter which charger I use so I don't know what the deal is.

I have an answer for the 3-2 red light blink w/black screen. Remove the battery, hold the end call button and put the battery back in. The red light should stay on for a while now. Push and hold the call button and alternate with the end call button untill the hourglass shows. Allow some time to boot up. I stumbled upon this, so if this doesnt work, try simmilar procedrues. I did get mine to work. Good Luck, dont give up, it flashes that 3-2 code for a reason.