Can you tell me what type of screw driver it takes to remover the bottom of the DGB-600 coffee maker?

Does anyone know where the check valve is? We’ve taken the machine apart to try and figure why it’s steaming. We’ve checked the hoses and the filter assembly to no avail.

The consensus seems to be that it is 1025 Watts, although I have a hard time believing it - not even a stand mixer is 1025 watts.

Here's a link to the manual:
http://www.cuisinart.com/share/man/1013_man.pdf

-Tha Mp3 Doctor

Replace the filter basket - they can be had for around $6.00 plus shipping - you can even get them directly from Cuisinart.

I pulled it almost all the way open- towards back and used a flat screwdriver (or small philips that can fit in space from behind) and I pushed up a bit towards center and it came right off- don't worry- shouldn't break if you just ease it out of it base on either side.

Turn on the Auto-Off feature - it should display "2:00" - press the hour button twice and change it to "4:00" - it will now go off after every 4 hours - that is the maximum time period allowed by the coffee maker.

-Tha Mp3 Doctor

Cuisinart DGB-600 replacement charcoal water filters is Cuisinart DCC-RWF 6 pack charcoal water filters, 12 filters.

there is two little plastic pieces sticking out of the bean holder and on the coffee maker where the bean holder goes there is 2 holes, take the bean holder and put one piece of plastic in the coffee maker holes at a time and it should fit just fine...

The unit has either wiring connection problem internally or the internal motor is blown, it can only be found once the appliance is opened.

I am having the same problem, can someone please help?