Question about Jet Tech Systems Dishwashers

2 Answers

We have a model F-18 sn 9901807 but no manual to know how many minutes it takes per load & wether it recycles rinse water for the nextwash etc.Can you help?

Posted by on

  • ljjohnson3 Sep 21, 2010

    MNfisherman,thanks for the info on accessing the tech manual on the dishwasher . Is there an operators manual also that would give me specifics on making it work efficiently?

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 12,061 Answers

Www.jet-tech.com/products/F-18DP/f18_tech_manual.pdf
Hi, above, I have found you a user manual, all is explained in there please download it and it will tell you what you wish to know... Hope this helps. :)

Posted on Sep 22, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

Www.jet-tech.com/products/F-18DP/f18_tech_manual.pdf

Copy and paste that link into your internet address bar or type it in.
That is your manual

Posted on Sep 21, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I charge the battery on a 1990 xlh sportster 1200


The voltmeter test provides general indicator of battery condition. Check the voltage of the battery to verify that it is in a 100 per cent fully charged condition. If the open circuit or disconnected voltage reading is below 12.6 V, charge the battery and then recheck the voltage after the battery has set for one to two hours. If the voltage reading is 12.8 V or above, perform the load test described below.



The load test measures battery performance under full current load and is the best indicator of battery condition. Load testing a battery tat is not FULLY CHARGED i.e. at 12.8 VDC can permanently damage it. Fully charge it first and then let it stand for at least an hour before the load test is done. You also need a load tester AND you should know how to perform a load test. Often the best way to load test a battery will be to take it to a battery shop and have it done there.



VOLTAGE and STATE OF CHARGE FOR AGM BATTERIES IS:

12.8 VDC is 100 per cent

12.6 VDC is 75 per cent

12.3 VDC is 50 per cent

12.0 VDC is 25 per cent

11.8 VDC is 0 per cent



COLD CRANKING AMPERAGE (CCA) for a DYNA battery is 270

Battery Charging Rates/Times (Approximate)



FOR A 19 AMP HOUR DYNA AGM BATTERY



BATTERY STATE OF CHARGE is 12.8 VDC is 100 per cent Charge; Rate of Charge is N/A



BATTERY STATE OF CHARGE is 12.6 VDC is 75 per cent Charge; Rate of Charge at 3 AMP is 1.75 hours at 6 AMP is 50 minutes at 10 AMP is 30 minutes at 20 AMP is 15 minutes



BATTERY STATE OF CHARGE is 12.3 VDC is 50 per cent Charge; Rate of Charge at 3 AMP is 3.5 hours at 6 AMP is 1.75 hours at 10 AMP is 1 hour at 20 AMP is 30 minutes



BATTERY STATE OF CHARGE is 12.0 VDC is 25 per cent Charge; Rate of Charge at 3 AMP is 5 hours at 6 AMP is 2.5 hours at 10 AMP is 1.5 hours at 20 AMP is 45 minutes



BATTERY STATE OF CHARGE is 11.8 VDC is 0 per cent Charge; Rate of Charge at 3 AMP is 6 hours, 40 minutes at 6 AMP is 3 hours, 20 minutes at 10 AMP is 2 hours at 20 AMP is 1 hour



The figures listed above assume that the battery is charging at room temperature. If warmer than room temperature, use a slightly shorter charging time. If colder, use a slightly longer charging time.



The use of constant current chargers to charge maintenance free batteries is not recommended. Any overcharge will cause dry out and premature battery failure. If a constant current charger is the only type available, do not exceed the charge times listed above and do not continue charging the battery if it gets hot. When charging, never exceed 15 volts for more than 30 minutes.



If the battery gets hotter than 110 degrees F or 43 degrees C during charging, discontinue charger and allow the battery to cool. Overheating may result in plate distortion, internal shorting, dry out and/or other damage.

Apr 22, 2014 | Harley Davidson XL 1200 S Sportster Sport...

1 Answer

LG Washing Machine Model : WD658 When using the function "Rinse & Spin", the timer decreases when rinsing. However, the timer decreases and stops at 9 minutes. This results the machine...


Try setting a lower spin speed. You may have a bulky load which the washer is having a difficult time getting up to the high speed spin you have selected. Also, did you know that on most LG washers, you can do just a spin without a rinse? Just turn the washer power on, then, without selecting a cycle, just push the spin speed selector to select the spin speed desired. This should set the cycle for about a 12 to 14 minutes pump and spin only. Then push start. You can spin that bulky load at the lowest spin, then try it again at the next faster spin if needed, without adding rinse water.

Mar 15, 2011 | Washing Machines

1 Answer

I have a Whirlpool Gold Utimate Care II washer (model # GSQ9364HQO [not sure if that last figure is a zero or O]; SN CJ 4931194]). The washing machine stops at the end of the wash cycle. I'm left with a...


no solution here but i have same model number and am recycling it. everything works but chassis is loose from use of over 10 years. let me know if yoiu want me to send you controllers, timers, etc.
ricracric@austin.rr.com

Oct 15, 2010 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

No problem, just looking for gal. per minute flow rate


It uses 1.2 gallons for each wash or rinse action in a cycle.  The water only runs until the 1.2 gallons amount is reached and then that water recycles through the pump for the duration of the action.  Start the dishwasher and time how long it takes until the water stops filling (not the entire time of the action).  Divide 1.2 by the number of minutes including seconds as a decimal fraction (i.e. 1 minute and 30 seconds = 1.5 minutes) to get the flow rate in gallons per minute (GPM).

May 29, 2009 | Amana 24 in. DWA33A Built-in Dishwasher

1 Answer

LA5558XSN0 Washer ExLarge Rinse Cycle doesn't engage


sounds like adrain line issue, your creatring a syphoning effect . id assume thedrain line is either real low, perhaps running across thefloor or is screwed tightly to a longer hose ejecting through a wall with a full dry well

Feb 26, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Water usage per cylce


water usage is about right. top loaders use far more and so does hand washing
only way there would be excessive water usage is if machine were overfilling

Aug 13, 2008 | Washing Machines

2 Answers

My Maytag front loading washer does not fully rinse cloths MAH8700A. I purchased this washer about 6 months ago. I usually wash small loads but have noticed it doesnt matter what size load. When first...


Is the drain path free-flowing? That is, does the water eject freely during spin/rinse? Maybe there's a restriction in the line, or it's too high above the washer.

Feb 25, 2007 | Maytag MAH8700A Front Load Washer

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

375 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jet Tech Systems Dishwashers Experts

Robert Marsolais
Robert Marsolais

Level 1 Expert

12 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Brad Brown

Level 3 Expert

18060 Answers

Are you a Jet Tech Systems Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...