Sansa e260 MP3 player

All of a sudden it won't charge ( either through the computer or the AC adapater) or be recognized by the computer as a device. I have changed cables and evertyhing "looks ok". I cannot figure out what's up. HELP>

TOMG

1 more comment
Anonymous May 21, 2008

don´t be recognotive

don´t be recognotive
Anonymous May 21, 2008

the unit don´t run, and can´t be detected by my pc, i don´t have the cd to install drivers
Anonymous May 22, 2008

My E260 charges the battery but, my computer refuses to see the device. The USB interface says I don't have a driver installed. Calling Sandisk Tech support they told me the disk does not have the drivers and that the drivers are embedded in XP. They sent me a link to Microsoft to download the latest MTP software and it still does not recoginize the device. Weird. It worked not to long ago.

1 Answer

Anonymous

Contributor 2 Answers
Posted on May 20, 2008

Anonymous

Contributor

Joined: May 20, 2008

Answers

Questions

Helped

240

Points

You Might Need a new battery or also try cleaning the usb intreance of your sansa e260 with a Q-tip.

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

Cannot find driver for sansa sandisk 4 gb e260

Hi cream_soda21,

There are no drivers needed to be installed because Sansa Sandisk is a plug and play device. However, if your device can't be recognized by the computer, please consider visiting the link below. Please follow the step by steps procedure.

Sansa player not recognized by the computer

Hope it helps.

Thank you for using FixYa.

Read full answer

Apr 07, 2011 • SanDisk Sansa e260 MP3 Player

0helpful

1answer

Sansa e260 is suddenly not recognized by my computer and is not charging, though device indicates it is connected. What is problem?

change the usb plug it willl work fine

Read full answer

Dec 25, 2009 • SanDisk Sansa e260 MP3 Player

0helpful

1answer

Half of song list not recognized by Sansa e260

i will surely help you. you have mentioned that you can see all the songs when your mp3 player is connected to the computer. so what you can do is, you can very well go ahead & format all the songs in your mp3 player using your computer. then you transfer a few songs to your mp3 player(the songs which were not getting recognized in your mp3 player). this should solve your problem.

Read full answer

Oct 29, 2009 • SanDisk Sansa e260 MP3 Player

1helpful

1answer

I'm trying to charge my Sansa MP3 player but am getting and error USB Device Not Recognized Help PLEASE!!!!

Try connecting it to another computer and see if it will recognize it as sansa or removable drive. if it does then download the sansa update software and install it. Make sure you disconnect the sansa and connect it when asked. This will update your sansa and add the Usb Mode. Try to connect it to your computer at home it should recognize.... link for update software (http://mp3support.sandisk.com/sansa/Installer/1082/SansaUpdaterInstall.exe) download to a flash drive much easier I used my friends labtop it worked USB 2.0

Read full answer

Apr 17, 2009 • SanDisk Sansa e260 MP3 Player

0helpful

1answer

Computer(s) wont recognize sansa e260

i have the same SANSA e260.....and the same problem....its easy just turn on your sansa then push the menu botton, slide the wheel in the center and at the end of the options say USB enter there and change usb mode from MTP to MSC mode.....and ready

Read full answer

Jan 02, 2009 • SanDisk Sansa e260 MP3 Player

0helpful

1answer

Sansa e260 mp3 player

my e260 sansa mp3 player dont recognized by computer what to do

Read full answer

May 06, 2008 • SanDisk Sansa e260 MP3 Player

0helpful

1answer

Sansa e-260

Try this: disconnect the player from the computer, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard.

Read full answer

May 04, 2008 • SanDisk Sansa e260 MP3 Player

0helpful

1answer

MY sansa e260 MP3 player

what operating system do you have? lets assume you have windows xp...first you will have to unintall your device from device manager...click on start, run...type devmgmt.msc...then look under portable devices, disk drives or universal serial bus controller...your device should be listed on either one of them..if you dont see it..click on the plus sign so you can expand it...then once you find your device uninstall it and reconnect it into a different port..make sure it is a 2.0...then windows should recognize it properly..if you are still having the same problem let me know..

Read full answer

Jan 03, 2008 • SanDisk Sansa E280 MP3 Player

0helpful

1answer

Cannot get my computer to recognize my Sansa e260 MP3 player

you only have to install the CD that came with your sansa in the box , after that it should recognize it

Read full answer

Dec 09, 2007 • SanDisk Sansa e260 MP3 Player

0helpful

2answers

Sansa e260 not being read by the system?

Does it show up in your windows explorer as another drive letter ?

Read full answer

Nov 26, 2007 • SanDisk Sansa e260 MP3 Player

Not finding what you are looking for?

View Most Popular

Sansa e260 MP3 Player

Audio Players & Recorders

Cannot find driver for sansa sandisk 4 gb e260

SanDisk Sansa e260 MP3 Player

77 views

Ask a Question

Usually answered in minutes!

Latest Celebrity Headphones Report

View all Fixya Reports

Are you a SanDisk Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for SanDisk Sansa e260 MP3 Player? Or just drag it here!

Related Topics:

Sansa e260 MP3 player