Hebrew languge software for sansa c240 mp3

You Can Download Free MP3 From Youtube By This Site : video2mp3.net
If you didn't found Your Favorite Music In Youtube Try These Sites : Beemp3.com or 4shared.com

The software/firmware of the player is going to need to be updated. You can download the latest drivers from the sandisk website so pc recognizes it, then download the software/firmware update and transfer it to the player

You can try the Sandisk website at http://www.sandisk.com/sandisk-support/driver-download-wizard
to see if you can locate drivers. It looks like just the firmware updater though

This is from the Sansa Website at http://www.sansa.com/support/sansa_e200/faqs

My e200 freezes on the “Refreshing Database” screen
STEP 1 – Reset the device

1. Press the Power button and hold it for approximately 10 seconds.
2. Release the Power button once the device is powered down.
3. Turn the device back on.

STEP 2 – Download and Install the Sansa Firmware Updater

I this helps please dont forget to rate my answer.

The Sansa Clip - US Version is the only one of the Sansa players not to have a firmware upgrade that adds correctsupport for Hebrew. I hope your player is Israeli. If it is:
Menu --> Settings --> Language --> Hebrew
(p. 19 of your user manual)

On the Clip, they had no right-to-left vs. left-to-right swapping functionality even with the firmware upgrade, I believe.

-Tha Mp3 Doctor

i want softwere of sansa c240

Attention: resetting the device will delete all the songs..

You can try to reset the device by pressing the power button for about 15 to 20 seconds..if that doesnt work I would recommend you to go to the sandisk site to update the firmware on your device or you can contact sandisk to they can help you with updating the firmware on your device..Please follow the link below to get the firmware
http://www.sandisk.com/Retail/Default.aspx?CatID=1376

The number for sandisk is 1-866-726-3475
Please rate accordingly
Thank you
Computerrep

These are the most common methods for recovering Sandisk's Sansa Mp3 Players. I have been almost universally successful in recovering Sansa players using one or a combination of these methods. These methods do not work if you are having synchronization or music format issues - they are for recovering a player that will not power up, freezes, flashes, is not recognized by the computer, and a host of other issues.

Reset the Sansa Player first. On most models, restart is done by holding the power button in for 15 seconds or longer. Check your specific manual to be sure. The manuals are available from the Sansa website if they have been misplaced.
Download the Sansa Recovery Tool from the Sansa website.
Format - Erases Everything: Connect your Sansa player to the computer and open Windows Media Player. Click on the Sync tab. Pull down the drop down menu underneath the Sync tab by moving your cursor over the Sync tab and left clicking on the little black arrow underneath the Sync tab. Highlight "Sansa 1GB" (wording may vary slightly), and then select "Format." - this should erase everything.
Firmware Upgrade- Erases Everything: Get the latest firmware upgrade from Sansa - it updates the firmware and erases every song in the player all at once. Note: this method doesn't work if already have the latest firmware. Go to this website and click "Firmware Updater" to find out: http://www.sandisk.com/DriverDownload/driverList.asp
If these fail, then:
Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard.
If you get the problem where MTP Device keeps popping up continuously, uninstall the “MTP Device” by going to Start à Control Panel àSystem à Hardware à Device Manager (you computer may vary slightly, depending on Windows Version).
You may have to restart your computer after each of these methods to get them to work properly. Disconnect your Sansa player BEFORE shutting down your computer.
-Tha Mp3 Doctor

my advice? get limewire

First you will have to make sure you have the latest version of Windows media player..Then you will need to go to the device manager, find the device and then you will have to uninstall then unplug the device...plug the device back in..make sure you have the device connected into a 2.0 port...windows should be able to recognize it...if not try to get the latest firmware upgrade from sandisk...if you other questions you can contact me at [email protected]....