Have a konica bizhub c6500 and getting error code 2861 any help please

Question edited for a lot more clarity.
Question translated to English, we only speak English here.
Question moved from Televisions category.

Konica Minolta Bizhub PRO C5500 Solution Manual (Page ...

ManualsLib https://www.manualslib.com > ... > Solution manual
Reconnect the terminal. 2.Failed ...

Accurio c2060 error c2221

Copytechnet https://www.copytechnet.com > ... > Konica Minolta
Jun 26, 2023 - C2221 can be caused by toner dusted sensors PS50 & PS51. I've seen C2221, when the drum bore fits too tightly onto the drum shaft. The imaging ...

Error Code C-2221 on C7000
Apr 3, 2019
C6500 Error codes C-2211 - C-2214
Aug 7, 2008
bizhub PRESS C1060 multiple codes/symptoms
Jun 21, 2022
C6500 C-2220 error
Jan 22, 2014
More results from www.copytechnet.com
..

Abnormality in the black charging unit.
Possible causes:
Black charging unit
HV Unit
Print Control Board

My best guess is that you have a faulty charge unit. Try swapping the units around with another colour and see if the fault code shifts.

HI
I HAVE KONICA C6500
ERROR CODE 3501 and 3802 but know the error 3501
I know it rech high temperature I change the sensor 1 UP fuser roller
and I reset the error, the machine start and stop again with error 3501

Please chalk The Developer tank there nite be short in developer

your porblem is in the charge corona or HV unit

- 4701 error

Communication fifo problem error 4702/4701 of 5500;6500;6501 konica minolta mfp printers

1) reseat all connectors in Ipb

2)image memery controle board

Inspite doing all these if the problem persists please reload the firm ware/flash firm ware.

Last one is to replace image memory board only .no need to replace prcb; overall status board; nvram

C6500 Scan sensor or scan problem

Hi, I have a C6500 Bizhub pro, but, recently displays an C2404 error. I need to print an urgent job and y can't!
Please helpme!

There is a paper somewhere in the copier. Maybe earlier you have a paper jam and one paper or just a part of the paper is still in the copier.

Most likely the paper is near the imaging unit.