I plug rcs plugs into the headphone outlet on this tv in order to take it to the amplifier, as they are the only outlet sockets on the TV - the only problem is, the sockets don't seem to work. I have tried just pluggin headphones into them and they don't mute the sound from the internal speakers and nothing comes through the headphones
Dear Customer,
Try this to solve your problem,
1
you have to check your headset in other system that your headset properly work or not .THIS WAY YOU CAN FIND YOUR HEADSET OR ITS PIN DAMAGE OR NOT.
2
than you can attach another speaker or another headset to your lcd output ,THIS WAY YOU CAN FIND YOUR PINOUT IS WORKING OR NOT .
3
than you have to realize that your lcd is not importing cause some models are design for proper country for porper signal identification code,so YOUR LCD MUST NOT IMPORT FROM ANOTHER COUNTRY,
4
check your volume level of your headset or amplifier,THIS WAY YOU MAY BE GOT YOUR SOUND IF ABOVE ALL ARE SUCCEDED.
5
you can check your power plug for your amplifier & volume settings also,
THIS WAY YOU CAN CHECK YOUR AMPLIFIER PROPERLY SETDUP OR NOT,
6
approximate 1200 pounds you had spent on this LCD ,
& at last i must have to tell you that before you many customer have same problem with sounds & video also so its failure model in hitachi if you have any warrenty than than replace or try to buy inplace of this model like panasonic LCD's are best,
or you can use your customer number for given with your documents buy on lcd to replace or any damage,USING THIS YOU CAN GET YOUR NEW SOUNDS FROM YOUR DEALER,
I AM SURE THAT YOU WILL GET SOLVE YOUR PROBLEM TROUGH THIS ARTICLE,
if you get still unsolved than contact me personaly
thnx
Ur connection are wrong i thin
please chek ur owners manual for right ones
i think then headphones jack(place u insert ur headphones) is bad..
u wil have to replace the headphones jack in ur TV sir..
please do it by a tech or do it urself at ur own risk
tat s the only solution u have got..
but make sure tat it is the headphones socket u r trying with..
that socket is surely dead..
may be due to some loose connections inside ur power board or the socket has gone dead...
i said u to luk into manual right..
that is it..
great job done..
×
297 views
Usually answered in minutes!
I can't see what other connections I can make as there are no other connections on the television other than Scart
Just managed to sove this problem - there are two output sockets on the side of the television. However, they only work with inputs TV, EXT1 EXT 3 and EXT4 + PC which is a pain. It also means you have to do a bit of changing around in the menu to get it to work - another pain.
Thanks for all your help anyway - much appreciated
×