Question about Viking 24 in. Professional Series VUD040 Stainless Steel (Premium) Built-in Dishwasher

1 Answer

The dishwasher will start to cycle. I can hear the water begin to run. I hear a click and at the time the dishwasher should start to run the cleaning cycle. During the cleaning cycle the dishwasher will stop working. The dishwasher is silent. The timer will continue and the water will drain out at the appropriate time.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,357 Answers

This is probably okay, you have clock like motions running the motor electric contacts. There needs to be a delay between some cycles or shorting will occur. The motor on some designs, for example. is reversed to pump out water. to have this work long term, a delay is inherent and not a concern.

Posted on Sep 17, 2010

  • buysellgb Jan 23, 2011

    DnC Sourcing is to make an Expert of developing products. ---> www.artdnc.com (82) 70-7893-2100)http://www.sourcingbuysell.com
    We have 15 years developing experiences and will implement the advanced products to our customer.
    Electronics, home appliances, sporting goods, medical products, smart phone, General Phones, machine equipment, cattle. Midsize engine
    * Mechanical design, tooling, product design, machine design, reverse engineering (image), product design, MOLD Analysis
    * Processor: AVR series, DSP, FPGA, ARM7, ARM9, etc.
    * Circuit design, PCB ARTWORK Use Program: ORCAD, PADS
    70% Motor Sales ---> www.buysellmotor.net, sourcing everything ->http://www.sourcingbuysell.com

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Water not draining completely.


Clean the drain filters: click on filters

Jan 24, 2013 | Kenmore Dishwashers

2 Answers

Cycle starts, but does not fill with water


When I start a new cycle, I first hear the pump run to empty out all remaining water, and after that I hear the motor run for the regular washing cycle, but there is no water in the dishwasher. After a few minutes, the cycle stops, and the washer claims the dishes are 'clean'. When I try starting a new cycle over and over again, about one in 20 times, the cycle will run normally with water. But then the next time, the problem starts all over again. Once a cycle starts correctly, everything works fine, including the rinsing.

Jan 11, 2013 | Bosch SHX5AL02UC Dishwasher

1 Answer

Maytag MDB4651AWS Dishwasher will not start.


Do you ever hear the fill solenoid click on to begin the filling. That is the first thing that has to occur. The water supply generally connects right to that solenoid. Ohm out the solenoid coil. ( breaker power off)

May 21, 2012 | Maytag Dishwashers

1 Answer

Cycle begins and we can hear water filling up, but the arm doesn't spin, and water isn't being "sprayed" around the washer. We can hear the dishwasher "clicking" throughout the cycle, but nothing else is...


There are a couple of things here. One is the pump is not coming on. The other is the unit leaking. Check the door seal for rips or tears on the bottom. Replace as needed. Also check the sump in the bottom of the unit to see if it has a lot of debris in it. This can cause the pump to not start. It could be more complex like the water valve is not shutting down all the way. The control board is bad etc.

Oct 13, 2017 | GE Profile PDW8600J Built-in Dishwasher

1 Answer

Runs but no water


Is the water cut off to the dishmachine. The first thing any dish washer should do at the beginning of the cycle is heat/fill with water. If you do not hear the water come on when you start the cycle, chances are that you have a bad fill valve, control circuit issue or no water supply to the dish machine.

Jun 08, 2009 | Dishwashers

1 Answer

No water running through cycle once filled....making humming noise once clicks into cycle


pump should be checked for restriction of movement,is there something blocking it?does the capacitor smell?if it does its blown(or meter check-more accurate),hope this helps

May 27, 2009 | Whirlpool Gold 24 in. Built-In Dishwasher...

1 Answer

Water pooling up in bottom of dishwasher


is there any way to run the cycle from the beginning and listen to hear if the machine is draining at all when the cycle starts do you hear the water spraying on the inside ? if not then you have several different possibilities....clogged drain line, pump impeller broken(sounds like running but no action), water just flowing back to washer the last one's an easy fix just loop the excess drain hose up like a reverse "p" trap on a kitchen sink drain this keeps the water from flowing back to the machine

Dec 15, 2008 | Whirlpool Dishwashers

1 Answer

Kitchen Aid Superba Wisper Quite will not start cycle


Intermittent door switch, should be available, easy to change out and inexpensive.

Aug 04, 2008 | Dishwashers

Not finding what you are looking for?
Viking 24 in. Professional Series VUD040 Stainless Steel (Premium) Built-in Dishwasher Logo

478 people viewed this question

Ask a Question

Usually answered in minutes!

Top Viking Dishwashers Experts

Ekse

Level 3 Expert

13434 Answers

Pierre Laplante

Level 3 Expert

2042 Answers

Craig Butler
Craig Butler

Level 3 Expert

1730 Answers

Are you a Viking Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...