In my htc p3300 smart phone they are showing align screen from 1 hour it is asking tap the target firmly and accurately at each location on the screen.

woh guyz ..can u help .guyz ,,
tap the targey firmly and accurately at each location on the screen the target will continue to move until the screen is aligned\\
...add me if you want to help me ..
.yahoomail : [email protected]
.facebook : [email protected]\
.twitter account : enrique_baguio

my phone showthn screen and masage tap the target firmly and accurately ateach location on the screen .The target will continue to move until the screen us aliged

showing align screen written in under

tap the target firmly and accurately at each location on the screen. the target will continue to move until the screen is aligned.

you have to update its firmware. it is corrupt. but first ,When Omnia powered off,hold onto the Call and Cancel buttons, press and hold the power button for a approximately 5 seconds until the reset screen shows up. If you do it wrongly, you will hear the samsung jingle and the startup animation.When it is on,hold onto the Call and Cancel buttons,poke the soft reset hole and the reset screen shall show up. otherwise, visit here for upgrade options.
regards

Thanks a lot. It worked perfectly:)

Tap the target firmly and accurately at each location on the screen.The target will continue to move until the screen is aligned,
pls help.what can i do.

You just need the Microsoft Active Sync From the microsoft website, nothing else.



Please rate if this solves your problem...

Go into the Display inside control panel. In the second tab, choose Calibrate screen. Once done, it should work properly

I accidentally click on something and my screen alignment for my HTC mobile phone has run significantly... When I tried to align the screen from the setting, it only write that tap firmly and accurately on the target. the target will continue to move until the screen is aligned. Till now, i tried many times but the alignment is still out

hi,

   u just do one thing..restart ur phone again..& when it asks u to set up ur windows..than tap on the black spot firmly ...u just need to tap on than spot only..nthing else after that leave..it will start processing..& ur phone will be on.

 

Thanks

 

Gizmo1