Music down load instructions

MP3 players can only play music files in mp3 file format.You can download mp3 music files from the Internet toyour computer and then copy them to your MP3 player using the USB cable.For your CD collection, you need to convert your CDs tomp3 music files onto your computer or download them from the Internet and thencopy them to your MP3 player after you have connected the USB cable tothe MP3 player and the computer.
You can do this using Windows Media player and Rip the CDs - Media Player willcreate a MP3 music file for each music track.Click on this link for instruction on converting musicfiles to mp3 file format :- http://www.fixya.com/support/r5798418-creating_transferring_mp3_music_files

Here is the manual for you:

http://dl.owneriq.net/f/fabd1491-37f0-4b34-7d08-cdf7feafd4ce.pdf

Good luck!
gylacz

Music files for MP3 players must be in mp3 file format.
For instructions on downloading mp3 music files from the Internet and converting CDs to mp3 music files then copying them to the MP3 player, please click on this link and follow my instructions :-
http://www.fixya.com/support/r5874192-play_videos_mp3_player

I found down loading music very easy.
The playing of the track was the problem, the track was mp3 and not protected but after 10--12 secs the player stopped playing the track. Have you had this problem?

I work for Coby technical support. Our customer service phone number is 1-800-727-3592.

How to load an MP3 player without using Windows Media Player. First, allow me to clarify a few things so that there is less confusion: When you connect an mp3 player to a computer, you will not be able to use it until it's disconnected. In other words, the only thing you should do while the player is plugged into the computer is adding or deleting files. You can't use the buttons on the player while it's communicating with the computer, and as long as it's connected to the USB port, it's communicating. Ok, let's get started! Step 1 Connect the player to your USB port using the cable that came with it. (NOTE): If the player has a male USB connector already on it, connect the player directly into the computer without using the cable. In other words, only use a cable if you have to. Step 2 Click the "Start" button or press the key on the keyboard that has the Windows logo, and go to My Computer (Windows XP) or Computer (Vista). Step 3 Locate your MP3 player on this screen. Do not close this window; just minimize it. (NOTE): It should show up under Devices with Removable Storage or as a device under "Other." Most importantly, it should show up on this screen as something! When the player is connected, you should have something on this screen (usually an icon of some sort) that represents the player. This lets you know that the unit is ready to receive files because it's being recognized by your computer. Step 4 Locate and open the folder that contains your music files. Step 5 Using the mouse, copy one or more files. (Right mouse click on file, then left mouse click on copy) Step 6 Go back to the "My Computer" or "Computer" screen, right mouse click on the icon representing the player and left mouse click on paste. You should see a small status bar appear showing the file(s) being copied from your music folder to the player. Step 7 Click on the Safe to Remove icon found in your system tray and disconnect the player. And that's it! If you need additional assistance, I will help in any way that I can.

If you feel this solution doesn't deserve a good rating, please let me know why so that I may better assist you. If there is anything more I can do to help, I will!

down load the new red button firmware from the creative site and load it onto the player, this should format the whole thing, you will lose your music though

hi you might need to run a recovery programme or update the firmware to do this then goto the sandisk website and down load the firmware onto your computer or download recovery programme ok
Once you have done this follow these instructions

1 turn mp3 off
2 slide hold/lock to on position
3 press and hold down rec button on left hand side keep held down
4 switch on whilst still holding down rec button on left hand side
5 it should now say recovery mode
once it says this then open the firmware file on your computer and follow instructions also do this if your using the recovery tool from the site.

If you have any problems then let me know ok

die

i cant find a install progame for my nextar 512mb mp3 player i need one asap

dropped new player and it wont stop making noices. what can I do?

thanks
646 232 7396