My HP M2727nfs prints blank pages. Even demo page / reports are blank. NO errors on display. Paper gets warm, so fuser works. New cartridge doesn't help. Neither cold reset. What can this be?

Do you mean your Epson Printer Printing blank pages? The Epson printer printing blank pages due to wrong paper size, outdated printer driver, Empty ink cartridge, dirty print head, improperly installed ink cartridge, and more.

Follow the steps to fix the Epson printer printing blank page issue:

·Restart the printer
·Fill the empty ink cartridge and reinstall the new ink cartridge
·Update printer drivers. If you have done all the above steps but still the printer printing blank pages.

Then follow more steps to fix the Epson printer prints blank pages issue.

you should check transfer belt or fuser unit.

mayby cardridges are empty

HP DeskJet f4280 Spitting Out Blank Paper. - HP Support ...

h30434.www3.hp.com > Printers & All-In-Ones > Print Issues

10 posts
Solved: I can hear it printing, but the paper is blank when it's finished. ... Mark as New; Bookmark; Subscribe; Subscribe to RSS Feed · Highlight · Print · Report ... green checks say every thing is good to go, but the test print comes out blank,. ... Reinstall the cartridges into the product, and then gently close the cartridge door.

my printer is printing blank pages, and i just changed ink

Because its possible to be more then one answer. Here is a direct link to the step by step process to self diagnose the possible solution.

http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c01626559

Instructions

1. Check the display for an error message. If the display reads "Clearing paper from printer," the engine has detected a jam and is attempting to eject the jammed pages automatically. These pages will often be blank.
   
2. Check the display for "Performing PRINT/STOP TEST" or "Performing SERVICE TEST." Either of these messages indicates that the printer is going through a test procedure that may eject blank pages.
   
3. Reduce the amount of paper in the input tray if the printer is feeding multiple blank sheets at a time. The printer will pull extra pages through if the input tray is overfilled.
   
4. Replace the paper in the input tray with the correct size if needed. If the 4600 printer detects the paper as an incorrect size for the print job, it may eject the paper without printing anything on it.
   
5. Replace the ink cartridges if certain colors are blank on the page. Replace the black cartridge if printing a black text document that is coming out blank. The printer may attempt to print even if the ink level is low or empty, but will unable to print anything on the page, causing it to come out blank.
   
6. Remove the sealing tape from newly installed cartridges. The tape covers the print heads and should be removed before installing the cartridges. If the tape is left on, it will prevent ink from getting on the pages as they print.
   
7. Press the "Check mark" button on the control panel to enter the printer menu. Run a diagnostic so the printer can attempt to determine the cause of the blank pages printing. Press the up or down arrow to select "Diagnostics." Press the "Check mark" button. Press the "Down" arrow to highlight "PQ Troubleshooting." Press the "Check mark" button. The printer runs a diagnostic and returns to a ready state when done.
   

Are you getting toner on the paper? To find out, print a test page. When you judge that the paper is under the toner cartridge, turn the printer off and look at the toner cartridge. Is your document displayed on the toner drum in toner? Is there toner on the paper?

No No Replace the toner cartridge. If that doesn't work you have more serious problems.

Yes No Replace the transfer roller.

Yes Yes If toner is smeared on the paper, replace the fuser.

Even though the toner was shown at 1/2, I had the fax machine operator install a new cartridge. Problem solved!

Hi there in the paper handling menu check the paper size settings as it maybe as simple as the incorrect paper size has been set in the machine


Hope this works for you
Thanks J