We have a motor trend power center jumpstart 700 peak amps. Lost manual where can I get a replacement.

I could not find any part suppliers for your unit.

I sent an email to PEAK product support on your behalf.

If you need immediate assistance, please call PEAK at 1-800-323-5440 (USA), (847) 559-2000 (International).

PEAK Auto Motor Oil Antifreeze Diesel Exhaust Fluid Electronics Windshield...

FYI: I have an 20-yea- old Epson dot matrix printer that had a plastic round knob that was used to move the paper forward. I had a replacement knob machined out of aluminum. I still have the printer and the knob has never broken again. Maybe that would work for your unit if the broken gear could still be used as a template.

Should have been a patch cord that connects directly to the unit and to 110 volt plug for charging the unit back up. There's a built in convertor that does the re-charge. Find that cord or purchase one from where you got the unit.

Get a recharge cord for the unit, plug it in and recharge.

TRY DOWNLOADING PRODOTOOL (CLOSE) MANUAL FINDER SOFTWARE

you said #11-406

The gell cell battery inside needs replacing.

take the air compressor battery jump start device to any auto parts stores that sales the same device they will give you idea and show you how it works.

This item appears to have a DC input jack on the front. Bring it to your local Radioshack and they can get you a replacement adapter with the right plug and voltage.

To recharge this unit at home use the AC charging adapter. Plug one end of the adapter into the AC/DC charger input port. Which is marked as number 7 on the image below. Then plug the other end of the adapter into a standard wall outlet. The charging port is located on the front of your power center and looks like the image below. If you did not get an AC charging adapter with your power center check the manual to see exactly what type you need. You will need to know the Voltage and AMPs of the adapter. Go to Radio Shack or an electronics store and purchase an adapter. It is very important that you make sure you get the right one. Your manual should tell you how many hours it takes to completely charge your power center.

Manual can be found at
http://www.thorsentoolco.com/Links/PDFs/11-414.pdf