Bosch Nexxt 100 Series WFMC1001UC Front Load Washer Logo
Anonymous Posted on Sep 11, 2010

WHY DOES MY WATER PUMP, ON MY BOSCH NEXXT 100 SERIES, RUN LITERALLY ALL THE TIME DURING SPIN. THE PUMP REMOVES WATER AS IT SHOULD, BUT JUST KEEPS CAVITATING AS IT KEEPS RUNNING. I CAN TELL IT KEEPS RUNNING BY THE REPETITIVE SOUND AND THE DISCHARGE HOSE WIGGLES WITH EACH CAVITATION

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Bosch Master 2,605 Answers
  • Posted on Sep 11, 2010
Anonymous
Bosch Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Sep 25, 2009
Answers
2605
Questions
0
Helped
1119535
Points
11111

Hello,

Welcome to FixYa.

Completely normal. The pump will indeed run through the entirety of the spin cycle, it is by design.

As the items spin, more and more water is extracted and if the pump should fail to operate during this time it would cause increased vibration and inadequate extraction to achieve it's superior spin cycles.

Hope that helps quell your concern. Let me know if I can assist you further.

Thanks for choosing FixYa. Please take a moment to rate the info provided here today.

Regards,

Macmarkus :)

Testimonial: "Thanks to Macmarkus for responding to my question. I HATE the loud continuous cavitating pump sound, but I must live with it. Dang!"

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Bosch nexxt 100 washer keeps getting water in drum

Check the way the waste pipe is connected to sink drain,could be purge back from here or could be faulty/ leaky fill valve,
0helpful
1answer

Bosch Nexxt 100 Series WFMC1001UC Front Load Washer wont spin belt is on pump is free of debris

Possible that the main motor is jammed or does not get power from the program controller unit. It is important that you measure the voltage at the motor when the program is set to start after the inlet valve fills water. If there is no voltage then the program controller unit is faulty.
Click this link for support : washing machine tips
0helpful
1answer

My bosch 100 nexxt will not spin or complete a full cycle

does it spin and no pump, or pump and no spin or neither does it come to end of normal wash and stop before spinning.
0helpful
1answer

We have a Bosch Washing Machine nexxt 100 series wfmc1001uc, the water lines froze without us realizing, we started to washer while lines were frozen... in the end, we had to replace the hot water inlet as...

Bosch Washing Machine nexxt 100 This video will show you how to change the pump washing machine
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.
And don't forget to like us on facebook



0helpful
1answer

Bosch Nexxt 100 series washer stops at 1st spin cycle

take a look at your manual that came with your machine go to problems usually at the back and see what that says,or go to the bosch website and type in your model number its on the inside of the door.i would suspect a program fault.adrian,,,,,
5helpful
1answer

Bosch Nexxt 100 series front load washer

You first of all need to check the pump filter.
This should be located at the botom front right of washer.
Look for a drop down flap or cover, once located, unscrew filter anti-clockwise to remove and clean.

The pump itself is directly behind the filter housing, check there is nothing stuck in the housing.
This should solve the prob.
Please leave feedback for my solution.
Thankyou.
0helpful
2answers

Washing machine does not spin

Nexxt 100 Series WFMC1001UC Front Load Washer This washing machine tutorial will show you what to do if the washing machine does not drain or empty the water out this repair was done on a Bosch, Neff and Siemens type appliance.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.
1helpful
3answers

Bosch Nexxt 100 Series washer

Look into your manual, clean outlet filter & refit. Machine will not spin out if filter is clogged.
Not finding what you are looking for?

415 views

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Oliver Street

Level 2 Expert

73 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...