I had the same problem but i solved it.
Follow the folliwing steps.
1- Download firmware nwz-b133f (firmware nwz-b130 V-1.01)
2- Download firmware nwz-b103 (firmware nwz-b100 V-1.3)
3- First execute firmware nwz-b100 , connect your walkman when the programm
asks: please connect device. Then the program ask format your device
you will loose all the data , click accept.
4- Don´t disconnect your device , wait until format and dataload are finished.
This is necesary because firmware nwz-b130 doesn´t do the format.
5- Disconnect your walkman and you will see it doesn´t start (logical it ain´t his
firmware)
6- Now execute firmware nwz-b130 , connect your walkman when the programm
asks: please connect device. Don´t disconnect your walkman wait until program ends.
7- When finished disconnect your walkman the save way.
8- Ready like new.
Greetings Quicktronics here from Mexico.
tried this and it worked, thx. but I had to do another step before the first firmware update - press and keep pressed the "vol -" button on the walkman while inserting it into the USB port and keep pressed until the nwz-b100 update program recognizes the walkman (and by the way it was nwd-b100 V1_3, and not nwz-b100 V1_3)
almost worked for me, just had to do an additional step before the first firmware update:
press the vol- button while inserting the walkman into the usb port and keep it pressed until the update program recognizes the walkman
and by the way, it is not nwz-b100 V-1.3 but nwd-b100 V-1.3, but Muhammad Idham posted the correct firmware link anyway...
Thanks. Worked perfectly!
the firmware stopped responding while opening the program. help me pls
×
Grate solution by rm 1961
To download the driver nwz b100 v1.3, check this url out :http://www.sony-asia.com/support/download/289419/product/nwd-b103f#downloadScrollable
4,860 views
Usually answered in minutes!
×