We recently purchased a M7410 to go w/ our existing system of M7310 phones. you can place a call from the base just fine, but not the handset. you pick up the handset, choose a line, hear a dialtone and call. Nothing is on the display of the handset. the call is received on the other end, but neither party can hear each other.

You may need to reset your handset in the following instances:

You lose a handset and purchase a new one. When you try and register to your existing base you get registration

failure.

You are unable to register any handsets to the base.

You had a base which needed to be exchanged by the manufacturer. When you register your existing handsets

to the base, the handsets say #3 and #4, but you only have 2 handsets.

When you are instructed to by the one of the manufacturer's call center representatives.

To reset, do the following:

Press and hold [ ] and [#] for more than 5 seconds. Select DEREGISTER HS.

WHICH HANDSET? appears. Select the handset that you want to de-register, and press the OK soft key.

DEREGISTER HS appears. Select YES, and press the OK soft key.

ARE YOU SURE? appears. Select YES, and press the OK soft key. You will hear a confirmation tone. The

handset will clear its registration information from the base, and then delete its own base information.

MODELS VARY! PLACE HANDSET ON THE BASE FOR REGISTRATION OR REFER TO OWNER'S MANUAL. To

re-register the handset to the base (see page 25).

If the handset cannot contact the base, it will display OUT OF RANGE. Make sure the handset is in range of the

base and the base is connected to power.

Note: It is also possible to reset the handset back to its original factory settings. All changes including Caller ID information

will be erased. For more information on resetting the handset back to factory settings and when you need to

do this, see www.uniden.com or call our Customer Service Hotline. See back cover page for contact information.

Resetting the Handset without the Base

If your original base is not available for some reason (for example, it is lost or somehow incapacitated), you can still

reset the handset and use it with another base.

Press and hold [ ] and [#] for more than 5 seconds.

Move the cursor to select BASE UNAVAILABLE and then press the OK soft key.

BASE UNAVAILABLE appears.

Move the cursor to select YES, and then press the OK soft key. ARE YOU SURE?

appears.

Move the cursor to select YES, and then press the OK soft key. You will hear a confirmation tone. The handset

will delete its own base information without trying to contact the base. When the base information is deleted,