Epson CX6600 Skips every other 5th line when printing

I take out the cartridges to reveal the print heads within the carriage.
Then connect a syringe with a pipe on it filled with cleaning fluid and force the fluid through each print heads. Please follow link.
http://www.specialistinks.com/unblock-printer-heads.php#

Update: Blurring of every 5th line occurs in text mode but not text & image mode. Know of a way to see text & image as default for all print jobs?

Canon printers do not like non Canon inks. Maybe other printers have similar issues but it seems that Canon is particularly finnicky.

This sounds like you need to replace the ink cartridges. Stuff is missing because the ink is very low or empty. Also, if you have just replaced the ink cartridges then you might need to do a cleaning cycle on the printer.

mine did the same i used copy paper now i use ink jet and it works fine

I have an Epson w/c had this problem a # of times. Go to the printer PROPERTIES tab (right click printer icon might work). Click on UTILITIES & you should see options for NOZZLE CHECK, HEAD CLEANING & PRINT HEAD ALIGNMENT. Follow instructions on all 3 until your Print Head Alignment printout is perfect. It might take a few head cleaning procedures
before you get it right. Good luck.

bonjour
je te pose une question
epson stylus cx6600 est tres bonne qualite mais ici en algerie est introuvable pourquoi?
malgré ete tres demandez dans le marche algerien
en fin j'attende votre repense
voci mon email [email protected]
merci

well..did you run a test page?

or clean the print heads?

or recalibrate them?

recommend all these steps for you

and as my 2200th solution, you are entitled to a FREE tuneup for good. find out more about that service here

If you try the print head alignment or head cleaning wizard under the maintenance tab, they may help!