Ive had my Sharp Aquos for about ten days. Yesterday, I tried to turn the TV on using the remote control that came with it (batteries are fine) and found that the TV simply isnt responding to the remote control. I tried using my cable remote (Scientific Atlanta HD box), which was programmed to be able to control the TV and had been working fine, and turned out that the TV was also no longer responding to the cable remote (the cable remote is still able to control the cable...e.g., change cable channels, pull up the guide, and everything else). I tried turning down the backlight, and still no effect. Can someone please help?
Unplugging my TV for 15 seconds (longer actually - at least a minute) made the remote and the satellite TV remote both work again with the TV. Thanks for the tip!
863 views
Usually answered in minutes!
turns out unplugging the tv for fifteen seconds and plugging it back in solved this problem!
Have exactly the same problem. Tried unplugging as suggested to no avail. Any other suggestions?
experienced the same problem.
The following solution worked.
turns out unplugging the tv for fifteen seconds and plugging it back in solved this problem!
have also tried the same but to no avail. please suggest something else.checked batteries and replaced them with new ones
×