Set ip address

You can find th IP by loggin in to your router.

Hi,

How to create an IP address into your Printer
1, Connect to LAN network
2, Power ON the Printer.
3, Select MENU Button
4, Go to System Settings, then select Network Settings.
5, You can see TCP/IP , View IP ,etc.....
6, Type Your Printer IP address, Subnet Mask, GateWay, etc...
7, That's All......
In different Printer settings will be different.
Now You can add printer into your computer

Go to Control Panel--> Hardware and Sound -->Device and printers -->Add Printer-->Add network Printer-->"If no printer were found" Select "The printer that i want isn't listed" --> Add printer using TCP/IP--> Type your Printer IP address--> Now you can install printer software...

Thanks

hi

Go to the Control Panel from the Start menu.

Step 2 Click "Network and Internet" and then "Network and Sharing Center."

Step 3 Click "Manage network connections."

Step 4 Choose which Internet connection you would like to change if you have more than one. Right click on it and select "Properties."

Step 5 Click the "Networking" tab.

Step 6 Choose either Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6).

Step 7 Click "Obtain an IP Address Automatically" to reset your IP address automatically, then click OK.

Step 8 Click "Use the following IP Address" to enter your own IP settings.

Step 9 Enter your IP address into the boxes marked "IP Address," "Subnet Mask" (or "Subnet prefix length for IP/TCPv6) and "Default gateway."
Change your DNS Server Settings

Step 1 Click "Obtain DNS Server Address Automatically" and then click "OK."

Step 2 Click "Use the following DNS Server addresses" to change your DNS Server settings manually.

Step 3 Type your primary DNS Server address into the box that says "Preferred DNS Server."

Step 4 Type your secondary DNS Server address into the box that says "Alternate DNS Server."
Add a New Network Protocol

Step 1 Click "Properties" and then "Install" from "Manage network connections."

Step 2 Click "Client," "Service" or "Protocol," depending on which you wish to add. Then click "Add."

Step 3 Select the item you want to add from the dialogue box and click OK.

Your in the copiers IP address into your web browser and go to address book and delete address , you can also add address's here. If you do not know IP address, go to machine, touch additional functions, system settings, network settings, tcp/ip, IP and write down #.

On control panel press "user functions" , then select admin tab, press password and type password (default is 123456),press network and then ipv4. There you need to type in free IP address, subnet mask and gateway.
For more ask your network admin.

Did you set the IP address to Manual ( Static) to set up a permanant IP address? If you left it on auto and DHCP settings wrong, it will search and reset the IP address. Run a configuration report and check to see if you IP address has changed, I bet it has.

I WANT T INSTALL SCANNER SOFTWARE IN MY SYSTEM

If the button on the touch screen is not visible for the network settings in the administrator settings there is definately something going on. Try connectng to the web interface by typing the current IP address of the copier into the address bar in Internet Explorer. If you do not know the IP address that was assigned to it then Google for Angry IP Scanner, download, and install it. Let it scan your network and find the IP address that way. If you have the right IP address nd cannot access the IP then try it in Mozilla Firefox. You PC must be in the same IP range for any of this to work.

Once you get into the web interface you need to hit LOGOUT as you are in public mode. Then log back in as administrator. The default password is 00000000 or more likely, 12345678. YOU MUST LOG OUT OF ADMIN MODE. DO NOT JUST CLOSE THE BROWSER WINDOW. This will lock up the control panel and cause problems.

You can change the IP address from the web interface in admin mode.

If none of this works then contact me and I will go further. Hope this helps.

Let me know the settings of your Router if needed IP address?
Yes - add your IP address into Network Connection.
No - obtained the setting in your Network Connection.

How to Add or Obtained the setting s of your IP address:
- goto Control Panel
- Double Click Network Connection
- Rigth Click then Properties the Local Area Connection
- Select Internet Protocol (TCP/IP) and select Properties
- Under General Tab they have choices to add or obtained settings.

Have the IP addresses changed ?
Is the copier set with auto IP ?
If either is Yes you will need to set the machine IP address.
Set the IP-Subnet mask-Gateway adresses

you can do this by pressing the additional functions button
( the* button That is in a circle)
then id management (bottom L/H col)
then network settings (2nd to top R/H col)
then protacol settings
then TCP/IP settings
Then change these settings to the desired settings

Then go to your computer and make sure the print driver has
the same settings

Go to your computer
Go to START
Go to CONTROL PANEL
Go to PRINTERS and FAX
Then either change or check settings or add a new printer

If you need further help please get in touch
thank you