where is the solution?
Headsets are connected to phones using a procedure called
‘pairing’. By following a few simple steps, a phone can be paired
with a headset in a matter of minutes.
1. Put the headset in pairing mode
• When you turn on your Jabra BT2050 for the first time, the
headset will automatically start up in pairing mode – i.e. it is
discoverable for your phone. When the headset is in pairing
mode the LED is constantly lit.
2. Set your Bluetooth phone to ‘discover’ the Jabra BT2050
• Follow your phone’s instruction guide. First make sure that
Bluetooth is activated on your mobile phone. Then set your
phone to discover the headset. This usually involves going
to a ‘setup,’ ‘connect’ or ‘Bluetooth’ menu on your phone and
selecting the option to ‘discover’ or ‘add’ a Bluetooth device.*
6
english
Jabra bt2050
3. Your phone will find the Jabra BT2050
• Your phone will find the headset under name “Jabra BT2050”.
Your phone then asks if you want to pair with the headset.
Accept by pressing ‘Yes’ or ‘OK’ on the phone and confirm with
the passkey or PIN = 0000 (4 zeros). Your phone will confirm
when pairing is complete.
JABRA BTx2050
JABRA BTx2050 JABRA BT2050
In case of unsuccessful pairing, put the Jabra BT 2050 into pairing
mode manually. Make sure the headset is off. Press and hold the
on/off button for approximately 5 seconds until the LED has a
constant light.The LED will flash before the light is constant –
keep holding down the button until light is constant
exelent
thank you! I could not figure out how to put the bluetooth in discovery mode. Thanks so much!
×
Kulakl?k ?ifremi unuttum
It is a PITA but I did get mine to go pair, first it lights up and flashes fast, keep holding then it starts to flash slower, you have to let go when it is blue to get it to stay blue. But it worked mine did pair with 2nd phone after that.
2,166 views
Usually answered in minutes!
×