I need to reinstall driver for USB mass storage device

Uninstalling and then reinstalling the drivers for the device is a likely solution to a Code 37 error, especially if the error is showing up on a device other than a BD/DVD/CD drive.

Important: If a USB device is generating the Code 37 error, uninstall every device under the Universal Serial Bus controllers hardware category in Device Manager as part of the driver reinstall. This includes any USB Mass Storage Device, USB Host Controller, and USB Root Hub.

Note: Correctly reinstalling a driver, as in the instructions linked above, is not the same as simply updating a driver. A full driver reinstall involves completely removing the currently installed driver and then letting Windows install it over again from scratch.

Reinstall HP printing software you obtained when you bought the printer.If you dont have it,download it from the net.Or plug your printer USB on your PC and then Windows will automatically look for the best driver.

if your computer came with a motherboard disk the drivers could be on it

click start control panel administrative tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X

you will need to update/reinstall drivers

right click to reinstall drivers

if you can see your usb drive but its not working
ports (com&lpt) right click update driver

if you dont have a disk with the drivers

you will need to download one try one of these

http://download.cnet.com/usb2-0-driver-zip/3000-18493_4-163914.html

http://download.cnet.com/usb-2-0-root/3000-18493_4-55793.html

http://download.cnet.com/usb-mass-storage-controller/3000-18493_4-161651.html USB Mass Storage Controller

http://download.cnet.com/via-usb-2-0/3000-2098_4-10163319.html

Install a USB 2.0 host controller driver

http://download.cnet.com/usb-mass-storage-controller/3000-18493_4-161651.html

http://download.cnet.com/usb2-0-driver-zip/3000-18493_4-163914.html

hope this helps

click start control panel administrative tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X

you will need to update/reinstall drivers

right click to reinstall drivers

if you can see your usb drive but its not working

ports (com&lpt) right click update driver if this fails to fix the problem

check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems to a computer and its parts

if you dont have a disk with the drivers

you will need to download one try one of these

http://download.cnet.com/usb2-0-driver-zip/3000-18493_4-163914.html

http://download.cnet.com/usb-2-0-root/3000-18493_4-55793.html

http://download.cnet.com/usb-mass-storage-controller/3000-18493_4-161651.html USB Mass Storage Controller

http://download.cnet.com/via-usb-2-0/3000-2098_4-10163319.html

Install a USB 2.0 host controller driver

http://download.cnet.com/usb-mass-storage-controller/3000-18493_4-161651.html

hope it helps

click start control panel administrative tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X

you will need to update/reinstall drivers

right click to reinstall drivers

if you can see your usb drive but its not working
ports (com&lpt) right click update driver

if you dont have a disk with the drivers

you will need to download one try one of these

http://download.cnet.com/usb2-0-driver-zip/3000-18493_4-163914.html

http://download.cnet.com/usb-2-0-root/3000-18493_4-55793.html

http://download.cnet.com/usb-mass-storage-controller/3000-18493_4-161651.html USB Mass Storage Controller

http://download.cnet.com/via-usb-2-0/3000-2098_4-10163319.html

Install a USB 2.0 host controller driver

http://download.cnet.com/usb-mass-storage-controller/3000-18493_4-161651.html
hope this helps

Should not be necessary. It is recognized by the system automatically. Try connecting to another port, check the data cable and the connection to the unit, it may be corroded or loose.

right click my computer, device manager,you should now see a list roll down list till you see universal serial bus controller,click on this and a list will drop down, the first 1 you see in list right click and pick update driver software.keep going down list doing the update software driver .that should reinstall missing usb storage driver .try pluging in an external hard drive if it reads drive and you can put and remove things then its already install but not showing.

If you have connected any external storage device such as external HDD, USB drive etc.
1. Unplug and replug the device.
2. Reinstall the USB drivers.
3. If a mobile is connected, then install the drivers for the mobile phone.
Also try reinstalling the memory card reader drivers.

right click on my computer>>manage>>device maneger>>universal serial bus controler>
from here you can reinstall driver or update driver.


hope so your problem will solve

The mass storage controller is generally for usb devices that you've plugged in. USB keys, memory cards etc.

This kinda falls under the realm of the USB drivers for your mainboard... which if they're working, you don't need to do anything. XP service pack 2 supports USB2 just fine, but service pack 1 will require you to get your manufacturers drivers to get USB2 working at full-speed.

Why do you want to change the default driver anyway??